merXu
Cancel
categories
Installation channels
Parameters
EUR
EUR
1852
10
0
218
105
185
1
439
22
183
42
36
99
271
111
156
36
555
42
105
2
33
54
112
177
176
119
34
48
3
0
0
0
202
259
114
255
177
176
34
549
199
21
39
0
33
33
2
0
54
79
221
286
59
321
20
266
46
139
448
338

Installation channels

(1,862 results)
Sort by
Cover strip for wall duct Legrand 010691 Duct joint cover Symmetric Snap on Plastic Untreated

Cover strip for wall duct Legrand 010691 Duct joint cover Symmetric Snap on Plastic Untreated

ELEKTRO - SYCHRA, spol. s r. o.
Starting at
€0.61 +VAT
CZK 15.40
  • Suitable for depth of wall duct [mm]: 35
  • Cover width [mm]: 65
  • Suitable for wall duct width [mm]: 80
  • RAL-number: 9003
  • Halogen free: Yes
Supplier
ELEKTRO - SYCHRA, spol. s r. o.
leave message
Termination to the sewers AKS Zielonka MKE ZAK 15/17 111360

Termination to the sewers AKS Zielonka MKE ZAK 15/17 111360

ASAJ Sp. z o.o.
Starting at
€0.29 +VAT
PLN 1.36
  • EAN: 5904617571029
  • Manufacturer: AKS ZIELONKA
Supplier
ASAJ Sp. z o.o.
leave message
AKS Zielonka MKE 60x110 electrical installation channel 111330

AKS Zielonka MKE 60x110 electrical installation channel 111330

ASAJ Sp. z o.o.
Starting at
€13.27 +VAT
PLN 61.18
  • EAN: 5904617570251
  • Manufacturer: AKS ZIELONKA
Supplier
ASAJ Sp. z o.o.
leave message
Kopos KEZ box for insulation

Kopos KEZ box for insulation

ELEKTRO - SYCHRA, spol. s r. o.
Starting at
€12.57 +VAT
CZK 319.83
  • EAN: 8595057698499
  • Manufacturer: Kopos
Supplier
ELEKTRO - SYCHRA, spol. s r. o.
leave message
Duct termination ZAK 60 (30/60, 40/60, 60/60) 111 428 AKS

Duct termination ZAK 60 (30/60, 40/60, 60/60) 111 428 AKS

ASAJ Sp. z o.o.
Starting at
€0.64 +VAT
PLN 2.95
  • EAN: 5904617572323
  • Manufacturer: AKS ZIELONKA
Supplier
ASAJ Sp. z o.o.
leave message
Kopos MDZ 8595057698505 thermal insulation mounting plate

Kopos MDZ 8595057698505 thermal insulation mounting plate

ELEKTRO - SYCHRA, spol. s r. o.
Starting at
€12.48 +VAT
CZK 317.60
  • EAN: 8595057698505
  • Manufacturer: Kopos
Supplier
ELEKTRO - SYCHRA, spol. s r. o.
leave message
Kopos Box KEZ-3 for thermal insulation

Kopos Box KEZ-3 for thermal insulation

ELEKTRO - SYCHRA, spol. s r. o.
Starting at
€14.26 +VAT
CZK 362.98
  • EAN: 8595568910561
  • Manufacturer: Kopos
Supplier
ELEKTRO - SYCHRA, spol. s r. o.
leave message
White electrical installation strip MKE 25X40 111303 Aks green

White electrical installation strip MKE 25X40 111303 Aks green

ASAJ Sp. z o.o.
Starting at
€2.52 +VAT
PLN 11.64
  • EAN: 5904617570138
  • Manufacturer: AKS ZIELONKA
Supplier
ASAJ Sp. z o.o.
leave message
Underfloor installation duct flush floor open Hager BKB250851 Dry

Underfloor installation duct flush floor open Hager BKB250851 Dry

SKONIECZNI A.W.J. Spółka jawna
€114.09 +VAT
PLN 526.00
  • Width [mm]: 250
  • Length [mm]: 2000
  • Min. height finishing layer [mm]: 96
  • Cover mounting opening: No
  • Cover attachment clamping: No
  • Bottom duct: Yes
Supplier
SKONIECZNI A.W.J. Spółka jawna
leave message
Underfloor installation duct flush floor open Hager BKB250851 Dry

Underfloor installation duct flush floor open Hager BKB250851 Dry

El-Skład Sp.J. W.Pałajski M.Migatulski
€114.09 +VAT
PLN 526.00
  • Width [mm]: 250
  • Length [mm]: 2000
  • Min. height finishing layer [mm]: 96
  • Cover mounting opening: No
  • Cover attachment clamping: No
  • Bottom duct: Yes
Supplier
El-Skład Sp.J. W.Pałajski M.Migatulski
leave message
Cover strip for wall duct Hager BR6517077035 Symmetric Steel Coated Light grey

Cover strip for wall duct Hager BR6517077035 Symmetric Steel Coated Light grey

El-Skład Sp.J. W.Pałajski M.Migatulski
€9.67 +VAT
PLN 44.60
  • Suitable for wall duct width [mm]: 170
  • Suitable for depth of wall duct [mm]: 68
  • Cover width [mm]: 80
  • RAL-number: 7035
  • Halogen free: Yes
Supplier
El-Skład Sp.J. W.Pałajski M.Migatulski
leave message
Cover strip for wall duct Hager BR6517077035 Symmetric Steel Coated Light grey

Cover strip for wall duct Hager BR6517077035 Symmetric Steel Coated Light grey

SKONIECZNI A.W.J. Spółka jawna
€9.67 +VAT
PLN 44.60
  • Suitable for wall duct width [mm]: 170
  • Suitable for depth of wall duct [mm]: 68
  • Cover width [mm]: 80
  • RAL-number: 7035
  • Halogen free: Yes
Supplier
SKONIECZNI A.W.J. Spółka jawna
leave message
End cap for installation duct Hager M55439010 Left/right Plastic Polyvinyl chloride (PVC) Untreated Snap on

End cap for installation duct Hager M55439010 Left/right Plastic Polyvinyl chloride (PVC) Untreated Snap on

El-Skład Sp.J. W.Pałajski M.Migatulski
€4.12 +VAT
PLN 19.00
  • Width [mm]: 230
  • Height [mm]: 61
  • RAL-number: 9010
  • With protective foil: No
  • Halogen free: No
  • Suitable for circuit integrity: No
Supplier
El-Skład Sp.J. W.Pałajski M.Migatulski
leave message
End cap for installation duct Hager M55439010 Left/right Plastic Polyvinyl chloride (PVC) Untreated Snap on

End cap for installation duct Hager M55439010 Left/right Plastic Polyvinyl chloride (PVC) Untreated Snap on

SKONIECZNI A.W.J. Spółka jawna
€4.12 +VAT
PLN 19.00
  • Width [mm]: 230
  • Height [mm]: 61
  • RAL-number: 9010
  • With protective foil: No
  • Halogen free: No
  • Suitable for circuit integrity: No
Supplier
SKONIECZNI A.W.J. Spółka jawna
leave message
Mini/Maxi trunking Hager ATA123019010 Plastic Polyvinyl chloride (PVC) Untreated Pure white Bottom perforation

Mini/Maxi trunking Hager ATA123019010 Plastic Polyvinyl chloride (PVC) Untreated Pure white Bottom perforation

El-Skład Sp.J. W.Pałajski M.Migatulski
€2.15 +VAT
PLN 9.90
  • Useful cross section [mm²]: 330
  • Number of permanent partitions: 1
  • Length [mm]: 2100
  • Number of plug-in partitions: 0
  • Width [mm]: 32
  • Height [mm]: 13
  • RAL-number: 9010
  • Transparent: No
  • Halogen free: No
  • Suitable for circuit integrity: No
Supplier
El-Skład Sp.J. W.Pałajski M.Migatulski
leave message
Mini/Maxi trunking Hager ATA123019010 Plastic Polyvinyl chloride (PVC) Untreated Pure white Bottom perforation

Mini/Maxi trunking Hager ATA123019010 Plastic Polyvinyl chloride (PVC) Untreated Pure white Bottom perforation

SKONIECZNI A.W.J. Spółka jawna
€2.15 +VAT
PLN 9.90
  • Useful cross section [mm²]: 330
  • Number of permanent partitions: 1
  • Length [mm]: 2100
  • Number of plug-in partitions: 0
  • Width [mm]: 32
  • Height [mm]: 13
  • RAL-number: 9010
  • Transparent: No
  • Halogen free: No
  • Suitable for circuit integrity: No
Supplier
SKONIECZNI A.W.J. Spółka jawna
leave message
Mini/Maxi trunking Legrand 330030 Plastic Untreated Pure white Bottom perforation Loose

Mini/Maxi trunking Legrand 330030 Plastic Untreated Pure white Bottom perforation Loose

TT Partner Artur Krupa
€1.56 +VAT
PLN 7.18
  • Height [mm]: 16
  • Useful cross section [mm²]: 305
  • Number of plug-in partitions: 0
  • Width [mm]: 25
  • Length [mm]: 2000
  • Number of permanent partitions: 0
  • Halogen free: No
  • Transparent: No
  • Suitable for circuit integrity: No
  • With cable fixing clip: No
Supplier
TT Partner Artur Krupa
leave message
End cap for installation duct Hager ATA122069010 Left/right Plastic Untreated Snap on Pure white

End cap for installation duct Hager ATA122069010 Left/right Plastic Untreated Snap on Pure white

SKONIECZNI A.W.J. Spółka jawna
€0.52 +VAT
PLN 2.40
  • Width [mm]: 24
  • Height [mm]: 13
  • RAL-number: 9010
  • With protective foil: No
  • Halogen free: Yes
  • Suitable for circuit integrity: No
Supplier
SKONIECZNI A.W.J. Spółka jawna
leave message
End cap for installation duct Hager ATA122069010 Left/right Plastic Untreated Snap on Pure white

End cap for installation duct Hager ATA122069010 Left/right Plastic Untreated Snap on Pure white

El-Skład Sp.J. W.Pałajski M.Migatulski
€0.52 +VAT
PLN 2.40
  • Width [mm]: 24
  • Height [mm]: 13
  • RAL-number: 9010
  • With protective foil: No
  • Halogen free: Yes
  • Suitable for circuit integrity: No
Supplier
El-Skład Sp.J. W.Pałajski M.Migatulski
leave message
End cap for installation duct Hager M61839010 Left/right Plastic Untreated Snap on Pure white

End cap for installation duct Hager M61839010 Left/right Plastic Untreated Snap on Pure white

El-Skład Sp.J. W.Pałajski M.Migatulski
€4.12 +VAT
PLN 19.00
  • Width [mm]: 45
  • Height [mm]: 30
  • RAL-number: 9010
  • With protective foil: No
  • Halogen free: Yes
  • Suitable for circuit integrity: No
Supplier
El-Skład Sp.J. W.Pałajski M.Migatulski
leave message
Didn't find what you were looking for? We will help you!

Installation channels

Installation channels are an excellent element that allows masking of cables. The vast majority of surface-mounted installations require their use. The design of individual types of cable channels allows their use and cable management in various types of installations. They are perfect for building wall and floor installations, both in offices and production halls, workshops and industrial facilities. They are also used as masking wires and protection of telephone installations, air conditioning and low voltage lines.

Installation channels - versatile applications

Installation channels allow for clear organization and protection of all kinds of cabling. Easy access to electric lines facilitates locating possible faults and removing faults. The design and construction allow the installation channels to be used multiple times during any modifications to existing installations. There is a wide range of various types of installation channels on the market that allow for aesthetic and safe finishing of rooms.

Installation channels can be mounted and cabling can be found in floors and floor surfaces. For this purpose, semicircular electrical installation strips glued or screwed to the substrate are used. They enable protection against damage and breakage of cables, as well as masking cables in offices and workstations requiring surface supply or communication cabling.

The most common locations for installation channels are all types of offices and technical rooms. The variety of profiles and types of trays, channels and installation strips allows for any location and use. Metal galvanized suspension ducts are used for cable distribution under the ceiling and in places requiring additional protection against accidental access. Perforated surfaces and systems of dedicated fasteners and connectors facilitate the finishing of technical rooms in buildings and production areas.

Construction and types of installation channels

In modern installation, what counts is price, safety, speed of installation, the possibility of any modification and the compatibility of its individual elements. The vast majority of installation channels in all types of rooms as well as external lines are made of PVC. It is a material that guarantees high quality and durability of individual elements. The predominant colors of the individual components are white, but there are also decorative channels imitating metal or wood. The accessories enabling cable routing include, apart from the typical straight connector, usually 2 meters long, additional accessories such as internal and external corners, tees and partitions. All these accessories facilitate masking the cables and allow for any finishing of the rooms. The Marmat company offers comprehensive solutions to facilitate cable management in all types of installations.

The ease of access to cabling and the possibility of multiple use of Marmat installation channels is a factor that influences the widespread choice of this type of solution by users. PVC material is characterized by mechanical resistance, low weight, does not corrode and at the same time is easy to install. Installation channels are usually sold complete with a protective cover. The average plumbing profile profile is 20 to 60 millimeters high and 40 to 120 millimeters wide. Other dimensions are also available depending on the destination. Some types of slats have fixed or removable partitions, symmetrical or asymmetrical. The chambers inside the installation channel can then be freely arranged and grouped into sections, depending on the thickness of the bundle and the number of cables. The chambers inside also allow you to separate power cables, telephone cables or installation of computer equipment.

In addition to the basic elements enabling cable routing and masking wires, connection accessories such as electrical sockets can be mounted on two or three-chamber installation channels through PVC boxes. Plugs, endings of installation channels, splitters and spacers also facilitate any cutting and aesthetic ending of individual fragments of the installed installations.