Vasco recuperator D275 IIIE (275 m3/h) with WiFi control as standard

Vasco D275 IIIE (275 m3/h) recuperator with WiFi control at standardziehttps://www.onnshop.pl/library/images/16692461_acf58d6715eb4a458a0781854366043a.jpgWydajność maximum 275 m3/h (pressure 150 Pa).Heat recovery 90%.Automatic air flow control for constant balance maintenance (Constant Flow), cross-counterflow polystyrene exchanger, summer bypass 100%, ISO air filter ePM1 55% for fresh air supply. Steel casing frame, entire internal structure made of EPP (expanded polypropylene: strength, insulation, vibration/noise damping), possibility of mounting the recuperator vertically (wall-mounted) or horizontally (ceiling-mounted).Recommended use of a dedicated PTC pre-heater (11VE44160).Przyłącza for installation with a diameter of 150 mm. The supplied equipment of the recuperator includes a Vasco Wi-Fi gateway (11FH30008), thanks to which, after connecting to the home internet router and installing the VASCO CLIMATE CONTROL application on a mobile device (Android, iOS), the user can control ventilation via smartphone from anywhere in the world.The VASCO CLIMATE CONTROL application includes: a weekly programmer for 5 ventilation intensity levels, the ability to change gears on the fly and to activate the "fireplace" program (temporarily increased air flow level).The application provides a preview of the current temperatures in the recuperator and the operating status of the summer bypass, pre-heater and anti-freeze protection.The application also allows you to modify the settings of the heat recovery unit. The included gateway requires pairing with the heat recovery unit after connecting to the internet router. The included equipment of the heat recovery unit also includes a wireless RF switch (11VE20012), which allows you to select 3 ventilation intensity levels and switch on the timed ventilation function.The switch's LED confirms correct operation, signals errors, and indicates the need to replace filters.The RF switch allows you to set the nominal performance (at maximum speed).The supplied wireless switch is paired with the heat recovery unit. The heat recovery unit control system provides for the possibility of using optional room sensors: carbon dioxide CO2 11VE20013 (installed in the living room) and humidity 11VE20014 (in the bathroom).After wirelessly pairing the sensors with the recuperator, it is possible to select program "A" - automatic regulation of ventilation intensity based on actual current needs.When equipped with optional sensors, the recuperator achieves the highest efficiency class energetycznej.CNO120