TIG AC/DC aluminum welding machine 200A WELBACH 10021429 ENTRIX 220M

Do you weld aluminum, steel, stainless steel or copper?You can always use a universal aluminum welder for alternating current (AC) or direct current (DC) with a welding thickness of 0,5-5 mm.In this way you will meet the requirements of the workpiece.Selection of all welding parameters and welding current up to 200 A is very easy on the clear control panel.Feel free to use the knob and buttons and check all values on the LED display.This way you will achieve precise welding results that will impress!Technical data:Voltage [V] - 220Zapłon TIG - HFTIG cable [m] - 4Chłodzenie - FanCurrent rise time (Up Slope) [s] - 1-15Kabel MMA [m] - 3Czas Current fall time (Down Slope) [s] - 0-25Czas gas flow before welding [s] - 0-1Przewód power supply [m] - 2Moc input [kVA] - 5.4Przewód grounding [m] - 3Współczynnik MMA welding power - 0,73Prąd [A] - 30-200Chłodzenie torch - GasMax. input current[A] - 9,6Zgodność with standard - EN60974-1Średnica MMA electrode [mm] - 1.6-4Prąd input max.[A] - TIG: 28; MMA: 43,6Prąd TIG AC welding [A] - 10-200Prąd TIG DC welding [A] - 10-200Grubość welding [mm] - 0,5-5Balans AC current [%] - 10-90Znamionowy input current [A] - TIG: 17,7; MMA: 27,6Napięcie open circuit [V] - 62Parametr AC balance - Clean Scope [%] - 10-90Parametr AC balance - Clean Width [%] - 10-90Średnica electrode (TIG) [mm] - 1,2-2Częstotliwość pulses (AC) [Hz] - 0,5-200Częstotliwość pulses (DC) [Hz] - 0,5-2002/4 Takt - YesTIG AC - YesTIG DC - YesARC-Force - YesHot Start - YesPulse function - YesDuty cycle at 25°C [%] - 80Wymiary (LxWxH) [cm] - 46 x 22 x 39Waga [kg] - 19.3Wymiary shipping (LxWxH) [cm] - 58 x 50 x 33Waga shipping [kg] - 20.9Zakres delivery:ENTRIX aluminum welding machine 220MUchwyt TIG welding machine WP26 with cable package (4 m)Grounding clamp with cable (3 m)Electrode holder with cable (3 m)More welding possibilities with the TIG AC DC welding machineThe modern IGBT inverter allows you to quickly switch between TIG DC, TIG AC and MMA welding methods.With currents up to 200 A, you can weld most metals with ease – no matter the conditions.Use the pulse function to achieve optimal welding results.Stabilize the arc even in difficult conditions by adjusting the pulse frequency to 200 Hz.Select numerous parameters of the pulsation function, such as start, base or end current.Adjust them optimally to the workpiece using the knob. Thanks to the ergonomically shaped welding handle, you can work in various positions, both vertically, horizontally and overhead.An aluminum welder gives you the chance to achieve high-quality welds with fewer sparks or spatter.The modern IGBT inverter allows you to easily change all parameters.Whether it is switching from AC to DC or selecting 2- or 4-taktem. operationReliably ignite the arc thanks to high frequency.MMA welding with Hot Start and Arc ForceFor electrode welding, use the supplied MMA holder for electrodes with a diameter of 1.6-4 mm.You can achieve the best results up to 200 A with the Hot Start and Arc Force functions.The Hot Start function provides a short-term increase in welding current after the welding process has started, so you can work reliably and cleanly from the very first moment.With the Arc Force function, you can adjust the arc to suit the material being welded and the desired weld density.Do you want to weld outdoors, even in strong winds?Use the MMA method.With a constant current you can achieve very good welding results on various metals such as steel, iron, cast iron, nickel or copper....