merXu
Cancel

Workshop/industrial luminaires

(1,461 results)
Sort by
LUMINANO405 disinfection luminaire LUMINANO405 disinfection luminaire

LUMINANO405 disinfection luminaire

Starting at
€526.08 +VAT
CZK 12,999.00
  • Lifespan: 50,000 hours
  • Light color: purple
  • Germicidal effect: ay
  • IP: IP20
  • Operating temperature: from -20C to 50C
  • Dimensions (mm): 110x80x1000
  • Wavelength: 405nm
  • Power consumption (Watt): 92
Supplier:
High bay luminaire Vtac IP65 4000K

High bay luminaire Vtac IP65 4000K

€86.94 +VAT
PLN 407.97
  • Manufacturer: Vtac
  • EAN: 3800157638074
  • Colour of light: 4000K
  • Angle: 90
  • Degree of protection (IP): IP65
  • Pull power: 100
  • Luminous flux: 12000
Supplier:
KU
KURCZOBA I S-KA S.J.
verified supplier
Response time: usually up to 3 days
High bay luminaire Vtac IP65 6400K

High bay luminaire Vtac IP65 6400K

€81.90 +VAT
PLN 384.32
  • Manufacturer: Vtac
  • EAN: 3800157632904
  • Colour of light: 6400K
  • Angle: 90
  • Degree of protection (IP): IP65
  • Pull power: 100
  • Luminous flux: 12000
Supplier:
KU
KURCZOBA I S-KA S.J.
verified supplier
Response time: usually up to 3 days
Didn't find what you were looking for? We will help you!

Workshop fittings

Workshop lamps are indispensable in every workshop, garage, and wherever various types of repairs or DIY are performed. What should you pay attention to when choosing a workshop lamp?

Workshop fittings - why are they needed?

Workshop lamps are additional light sources ensuring effective work. In the workshops, daylight is usually very limited. Even with good central lighting, additional light support is necessary. Thanks to it, the working surface will be properly illuminated. It is necessary during installation works, in mechanical workshops and wherever it is necessary to illuminate systems that are difficult to access or dirty. In car workshops and private garages, the lamp will allow light to reach even inside the canal. This will increase the comfort of work in places that are difficult to reach for other light sources. Flashlights will not work in a workshop because they are not adapted to work in difficult conditions, and they are simply inconvenient. The workshop lamp is not only mobile, but also resistant to the conditions in the workshop. Adequate lighting has an impact on work safety, therefore it should not be underestimated. Poisonous, flammable and even explosive substances are often present in the workshop. It is imperative to maintain high safety standards. The heat emitting lamp could cause, for example, an explosion, and consequently threaten the health and life of people working there.

How to choose workshop fittings?

There are several important aspects to consider when choosing a workshop lamp. The first is whether the lamp is to be mobile or mains powered. We can choose from portable lamps powered by a capacious battery, low-voltage powered from a cigarette lighter and powered by long cables. Another aspect is the durability of the housing. Depending on the conditions in the workshop, the lamp must be adapted to them. Therefore, it should be made of the highest quality plastics. The light source must be protected against mechanical damage, high temperature and acids. Many workshops are humid or dusty. For this reason, the lamp must also have adequate resistance to moisture and high tightness. It is also worth considering what additional features the lamp should have. Some models are equipped with a magnifier that magnifies and illuminates the selected area. The ability to adjust the lighting angle is another advantage of the lamp for the workshop. The method of its suspension is also of no less importance. The possibility of hanging in various places will definitely facilitate the work. Fixtures with a pendant as well as with a magnet are available. A perfect solution is a tripod that allows you to adjust the height.

What to pay attention to when choosing a workshop?

Specialist workshop lamps are designed for special tasks. Therefore, they must provide excellent lighting and, at the same time, allow the light beam to be precisely directed at the selected element. Light similar to natural can be obtained with the help of LED lamps. We can choose lamps of different power and brightness of the emitted light. This makes them ideal for precision work. These lamps produce little heat, which is important in workshops with high temperatures and poor ventilation. The material from which the frames are made should not heat up. Their low electricity consumption is also important. Battery lamps will work wherever there is no possibility of connecting to the mains. Their value should reach a minimum of 3500 mAh. For most workshops and garages, the workshop luminaire should be hermetic. Therefore, luminaires with IP 44 or more will work. They will eliminate many threats and increase work safety. A suitable lamp housing that does not emit heat eliminates the risk of burns or the impact of high temperature on flammable materials that are present in the workshop.

Our offer includes workshop luminaires that allow you to adjust the lighting to the conditions in each workshop. They will increase safety, illuminate and improve the standard of the workshop.