MAAD ZW-1300 / 1,5 / EL VALOVAČKA ELEKTRICKÝ STROJ ELEKTRICKÝ VALEC NA PLECHY 1-FÁZOVÝ VALEC NA PLECHY MAAD ZW-1300 /1,5 mm EL
1-PHASE
Bending machine Rolling machine MAAD ZW-1300 / 1.5 / EL is a machine for coiling and unrolling cylindrical pipes, tapered pipes with low taper, gutters and all kinds of metal sheets up to a thickness of 1.50 mm and tensile strength Rm up to 400 MPa.
The main working elements of the coiler are 3 shafts.Two of them located in the front part of the machine (upper and lower) perform the function of pulling the rolled sheet metal.The third, at the back of the device, the so-called loose thanks to the adjustment of the position, it gives the appropriate diameter of the processed sheet.The idler roller is supported by two roller carriages mounted on the bogie frame, which moves with the roller during its adjustment.Such a design solution prevents the shaft from deforming during sheet coiling.
Thanks to the additional milling in the upper shaft, it is possible to make locks for downpipes on the winder.The upper shaft, detachable on one side, allows for quick removal of the workpiece.An additional chain transmission in the coiler, which drives the idler shaft, improves the working parameters during coiling.
The use of the inverter in the electrical system allows for a stepless adjustment of the rotational speed of the working shafts from the inverter's front plate or the potentiometer located at the machine's control pedals (activating left and right rotation).You do not need a three-phase power supply to drive the coiler - the power supply is single-phase 230 V.
The machine is equipped with a safety switch and has a declaration of conformity with European Union standards.
Technical parameters:
- Max. sheet thickness: 1.5 mm for Rm & lt; 400 MPa
- Motor power: 1.1 kW
- Geared motor gear: 1:30
- Machine power: single-phase
- Shafts rotational speed top and bottom: 0 - 26 rpm
- The speed of the processed sheet: 0 - 7.3 m / min
- The maximum width of the sheet: 1.250 mm
- Diameter of working rollers: 1x60 mm, 2x90 mm
- Minimum diameter of the sheet to be rolled: 100 mm
- Maximum diameter of the sheet to be rolled: 1000 mm
- Weight: 330 kg < / li>
- Detachable upper shaft with a milled groove.
Overall dimensions of the machine:
- height - 1.100 mm
- width - 1.800 mm
- depth - 700 mm
- Detachable upper shaft with a milled groove.
The elements of the coiler are made on precise CNC machine tools.
The machine is covered with a double layer of high-quality paint - the painting process is performed in a professional, heated and ventilated paint shop.