EPEVER MENIČ NAPÄTIA IPT1500-12(E) 12V/1500W
The IPT series products are advanced sine wave inverters that enable the conversion of voltage 12VDC to 220/230VAC.These devices are perfect for photovoltaic systems, offering a wide input voltage range.This makes them versatile and can power a variety of devices, including lighting, equipment in campers and caravans, as well as smaller photovoltaic installations.They are a reliable solution for customers looking for a stable and flexible power source in various applications.
Main FeaturesPure sine wave output
Compliant with EN/IEC62109-1/2, EN61000-6-2/4 and FCC standards.
Input protection: low voltage, high voltage
Output power factor to 1
External switch system allows for expansion of the inverter control function and reduction power consumption
Communication port RS485 for remote monitoring
Output protection: overload, short circuit, overheating
Electrical isolation between input and output % p14/%
Diversified AC Output Sockets
SpecificationContinuous Output Power 1500W
Peak Power % p24/% 3000W@5S
Output voltage 220VAC (±3%); 230VAC (-7%~+3%)
% p36/% Output frequency 50/60Hz ± 0.2%
Output signal Pure sine wave
%p46/ % Output Signal Distortion THD THD ≤ 3% (Resistive Load)
Load Power Factor 0,2 ~ 1 (Power Factor loads ≤ Continuous output power)
Nominal input voltage 12VDC
Input voltage range %p64 /% ~ 16.0VDC
Nominal output efficiency > 89.0%
Maximum output efficiency > 90.0%(Obciążenie 30%)
Idle Current < 0.2A
No-load current < 1.2A
Communication port RS485 5VDC/200mA
Input terminal %p97 /%
Dimensions (L x W x H) 387 × 228 × 118mm
%p107 /% Mounting dimensions 361 × 145mm
Mounting hole size Φ6mm
%p118 /% Weight 4.8kg
Operating temperature -20℃ ~ +60℃
Storage Temperature -35 ℃ ~ +70 ℃
Relative Humidity ≤ 95% (N.C.)
Enclosure IP20
Height < 5000m (If the height exceeds 1000 meters, the rated power will be reduced according to the standard IEC62040.)