Anténa pre komunikáciu WIFI SOLAREDGE SE-ANT-ZBWIFI-KIT

SolarEdge has been operating in the photovoltaic market for several years and has over a 70% share in the energy optimization sector.The SolarEdge system enables you to get more solar power from any PV system by effectively removing known system constraints in the PV space.The SOLAREDGE SE-ANT-ZBWIFI-KIT WiFi communication antenna has two uses - it is used to connect the SolarEdge device to a monitoring platform via Wi-Fi and to connect the SolarEdge device to Smart Energy devices via ZigBee communication.

SolarEdge SE_ANT-ZBWIFI-KIT antenna compatibility

This is an inverter antenna for a wider range.You can use it both outdoors and indoors with the new SetApp inverters, which have built-in Wi-Fi but have too little range.The device has a range of up to 50 meters inside the building and up to 400 meters outside depending on the installation of the inverter.The manufacturer provides a 0-year warranty.

SolarEdge SE-ANT-ZBWIFI-KIT WiFi antenna - Technical parameters

SolarEdge SE-ANT-ZBWIFI-KIT WiFi antenna is characterized by the following technical parameters:

electrical parameters

• frequency range - 2.4-2.5 GHz

  0

  1 gain (max ) -

  2 dBi

  3

  4 beamwidth - horizontal -

  5 degrees

  6

  7 beamwidth - vertical -

  8 degrees

  9

  0 maximum input power -
  1
  2
  3 input impedance -
  4 Om
  5
  6 VSWR -
  7
  8
  9 polarization - linear

  0

  1 impedance -

  2 Om

  3

  4 radiation - omnidirectional

  5

  6 antenna type - collinear antenna

  7

  8 antenna design - bipolar

  9 0 application - outdoor / indoor 1 2 3 4 environmental specifications 5 6 7 8 operating temperature - from 9 to 0 degrees Fahrenheit; from 1 to 2 degrees Celsius 3 4 humidity - 5 to 6 non-condensing 7 8 9

  0 mechanical specifications
  1
  2
  3
  4 dimension (height x diameter) -
  5
  6 In / mm
  7
  8 weight -
  9 Ibs / gr
  0
  1 cable -
  2
  3
  4 cable length (max) -
  5
  6 In / cm
  7
  8 connector - RP SMA
  9
  • 0 internal material - printed board (PCB)
  • 1
  • 2 base material - PC Lexan
  • 3 or
  • 4 Sabic
  • 5
  • 6 number of devices in the box -
  • 7
  • 8
  • 9