25 MM-ES CLIC CLAMP

The main idea of the clamp is simple and quick assembly that allows to shorten the time needed to perform the installation.The snap-in handle with an internal thread enables precise mounting of the mounting height for level or slope with an accuracy of up to 0.5%.Thanks to the clamp, it is possible to install several pipes on the same threaded rod while maintaining its load capacity.The clic clamp consists of two elements: the base and the band-shaped clamp, which is closed on the pipe.The handle allows you to mount the clamp on M8 threaded rods by turning it by 900 and snapping it on the rod.The internal thread allows the clamp to rotate around the rod axis, which allows us to change the mounting height.Clic clamps made of polypropylene are intended for fixing installation pipes made of copper, PVC-U, PVC-C, PP, PE, PEX, PB inside and outside of residential buildings, collective residence, public and utility buildings.The pipes should be fastened in accordance with the technical design, prepared in accordance with Polish Standards and construction regulations, in particular with information from pipe manufacturers regarding the installation conditions.The material from which the clamp is made shows high corrosion resistance, therefore it can be used in rooms with high humidity.