MAAD ZW-1300/1.5 VALSSAMALLE TELAT MAAD ZW-1300 /1.5mm

ROLLING MACHINE ROLLING MACHINE FOR SHEET SHEET MAAD ZW-1300 / 1.5 mm Bending machine The MAAD ZW-1300 / 1.5 rolling machine is a machine used for winding cylindrical pipes, tapered pipes of low convergence, gutters and all kinds of sheets up to a thickness of 1.50 mm and tensile strength Rm up to 400 MPa.

The main working elements of the coiler are 3 shafts.Two of them located in the front part of the machine (upper and lower) perform the function of pulling the rolled sheet metal.The third, at the back of the device, the so-called loose thanks to the adjustment of the position, it gives the appropriate diameter of the processed sheet.The idler roller is supported by two roller carriages mounted on the bogie frame, which moves with the roller during its adjustment.Such a design solution prevents the shaft from deforming during sheet coiling.

Thanks to the additional milling in the upper shaft, it is possible to make locks for downpipes on the winder.The upper shaft, detachable on one side, allows for quick removal of the workpiece.An additional chain transmission in the coiler, which drives the idler shaft, improves the working parameters during coiling.

The coiler shafts are driven manually by a cylindrical gear with a crank.

Technical parameters:

• Max. sheet thickness: 1.5 mm for Rm & lt; 400 MPa
• Maximum width of a sheet of metal: 1.300 mm
• Diameter of working shafts: 1 x 65 mm, 2 x 90 mm
• Minimum diameter of the rolled sheet: 100 mm
• Maximum diameter of the sheet to be rolled: 1000 mm
• Weight: 260 kg
• Removable upper shaft with a milled groove.

Overall dimensions of the machine:

• height - 1.100 mm
• width - 1.800 mm
• depth - 700 mm

Coiling elements are made on precise CNC machine tools.

The machine is covered with a double layer of high-quality paint - the painting process is performed in a professional, heated and ventilated paint shop.