Hydraulikzylinder für Formen * V500CZ *
springen
20-250mm
Kolbendurchmesser
25-100mm
Bestimmung
Spritzguss / Druckguss
Anfrage senden
Dieses Angebot ist nicht mehr aktiv. Fügen Sie eine Anfrage hinzu und erhalten Sie Angebote von mehreren Verkäufern.
springen
20-250mm
Kolbendurchmesser
25-100mm
Bestimmung
Spritzguss / Druckguss
V500 CZ is a compact double-acting, long stroke, linear motion hydraulic cylinder with a steel body and a single-piston rod.
The standard version is produced with a piston diameter from 25 mm to 100 mm and a stroke from 20 mm to 250 mm.
One of the strengths of this hydraulic cylinder is its remarkable hydraulic resistance to high pressure despite its extremely compact design.Additionally, in this cylinder it is possible to use the SPEEDPORTS system patented by VEGA Cylinders, which allows for a much faster oil flow.
Sleeve hydraulic seal system includes scraper and 2 Viton O-rings.These elements provide a hydraulic seal with considerable durability and resistance over time.The fluid compatible with the V500CZ hydraulic cylinder is ISO VG 46 mineral oil.
The piston stroke of the V450CM hydraulic cylinder can be controlled by inductive or mechanical sensors.The signal can be sent to the PLC of the plastic injection molding machine.
The Maximum temperature of the resistance is 80 ° C for inductive sensors and 180 ° C for mechanical sensors.The maximum hydraulic operating pressure is 500 bar, and the maximum speed is 1 m / s.
Vega offers not only 1 year of official warranty for the actuator, but also ongoing technical support.This long stroke hydraulic cylinder can be delivered in a very short time thanks to the Vega warehouse supply.It is possible to personalize this product by sending an inquiry to our e-mail address.Every Vega product is tested before it leaves the factory to guarantee efficiency and no problems such as oil leakage.
The standard version is produced with a piston diameter from 25 mm to 100 mm and a stroke from 20 mm to 250 mm.
One of the strengths of this hydraulic cylinder is its remarkable hydraulic resistance to high pressure despite its extremely compact design.Additionally, in this cylinder it is possible to use the SPEEDPORTS system patented by VEGA Cylinders, which allows for a much faster oil flow.
Sleeve hydraulic seal system includes scraper and 2 Viton O-rings.These elements provide a hydraulic seal with considerable durability and resistance over time.The fluid compatible with the V500CZ hydraulic cylinder is ISO VG 46 mineral oil.
The piston stroke of the V450CM hydraulic cylinder can be controlled by inductive or mechanical sensors.The signal can be sent to the PLC of the plastic injection molding machine.
The Maximum temperature of the resistance is 80 ° C for inductive sensors and 180 ° C for mechanical sensors.The maximum hydraulic operating pressure is 500 bar, and the maximum speed is 1 m / s.
Vega offers not only 1 year of official warranty for the actuator, but also ongoing technical support.This long stroke hydraulic cylinder can be delivered in a very short time thanks to the Vega warehouse supply.It is possible to personalize this product by sending an inquiry to our e-mail address.Every Vega product is tested before it leaves the factory to guarantee efficiency and no problems such as oil leakage.