merXu Protected Payments
Забезпечте свій платіж до моменту доставки.
9,5kW SPRSUN HEAT PUMP KIT FOR SELF-INSTALLATION
+ Buffer 100L and container 170L
+AKCESORIA MOUNTING
We present a complete kit for installing a heat pump in central heating and domestic hot water, which can be installed by the buyer himself or by an installer.
A pump with a thermal power of 9.5kW is sufficient to heat a well-insulated house with underfloor heating with an area of approximately 200m2.It is not worth oversizing the pump, i.e. using too powerful one.In severe frosts, the heater will turn on for some time (applies to temperatures below -15 degrees), but at typical temperatures, i.e. around zero degrees, the pump will operate stably in long cycles, which extends its life and improves efficiency (the catalog efficiency is achieved after a few or even a dozen or so minutes of work).
The set includes a modern inverter pump in which the compressor and fan have adjustable speeds.Thanks to this, the pump automatically regulates the operating speed and, consequently, the efficiency.This increases the durability of the pump, as the compressor switches off very rarely (several times a day)
The kit contains all the necessary elements for a central heating and domestic hot water installation for your home.The set also includes installation tools (only the typical French wrenches are missing)
We encourage you to purchase our guide on heat pumps:
https://www.solarne.info/sam-instaluje-pompe-ciepla-poradnik-instalatora-wersja-10-z-dnia-6042021r-p-1940.html
This guide is available as a free gift when purchasing a heat pump for PLN 10
Due to the value and weight, the goods are delivered on pallets.
The assembly and installation of a heat pump is simple (much simpler than, for example, a gas furnace).You can do it on your own or use the help of a plumber.
The electrical connection should be made by an electrician in accordance with the regulations.
Estimated additional costs:
Electrical services approx 8 hours, cost 1200 PLN
Plumbing services approx 16 hours, cost 2400 PLN
+ Buffer 100L and container 170L
+AKCESORIA MOUNTING
We present a complete kit for installing a heat pump in central heating and domestic hot water, which can be installed by the buyer himself or by an installer.
A pump with a thermal power of 9.5kW is sufficient to heat a well-insulated house with underfloor heating with an area of approximately 200m2.It is not worth oversizing the pump, i.e. using too powerful one.In severe frosts, the heater will turn on for some time (applies to temperatures below -15 degrees), but at typical temperatures, i.e. around zero degrees, the pump will operate stably in long cycles, which extends its life and improves efficiency (the catalog efficiency is achieved after a few or even a dozen or so minutes of work).
The set includes a modern inverter pump in which the compressor and fan have adjustable speeds.Thanks to this, the pump automatically regulates the operating speed and, consequently, the efficiency.This increases the durability of the pump, as the compressor switches off very rarely (several times a day)
The kit contains all the necessary elements for a central heating and domestic hot water installation for your home.The set also includes installation tools (only the typical French wrenches are missing)
We encourage you to purchase our guide on heat pumps:
https://www.solarne.info/sam-instaluje-pompe-ciepla-poradnik-instalatora-wersja-10-z-dnia-6042021r-p-1940.html
This guide is available as a free gift when purchasing a heat pump for PLN 10
Due to the value and weight, the goods are delivered on pallets.
The assembly and installation of a heat pump is simple (much simpler than, for example, a gas furnace).You can do it on your own or use the help of a plumber.
The electrical connection should be made by an electrician in accordance with the regulations.
Estimated additional costs:
Electrical services approx 8 hours, cost 1200 PLN
Plumbing services approx 16 hours, cost 2400 PLN