MAAD ZW-1300/0.8 VALJARNA PLOČEVINA ROLLERS MAAD ZW-1300 /0.8mm

SHEET ROLLER MAAD ZW-1300 / 0.8 SHEET ROLLER

The MAAD ZW-1300 / 0.8 machine is ideal for roofing treatments such as gutters and downspouts.Thanks to the use of proven and durable technical solutions, the machine can be used for many years without failure.

The ZW-1300 / 0.8 bending machine is a machine used for coiling and bending cylindrical pipes, tapered pipes with low taper, gutters and all kinds of metal sheets up to a thickness of 0.80 mm and tensile strength Rm up to 400 MPa.

The main working elements of the coiler are 3 shafts.Two of them located in the front part of the machine (upper and lower) perform the function of pulling the rolled sheet metal.The third, at the back of the device, the so-called loose thanks to the adjustment of the position, it gives the appropriate diameter of the processed sheet.

Thanks to the additional milling in the upper shaft, it is possible to make locks for downpipes on the winder.The upper shaft, detachable on one side, allows for quick removal of the workpiece.An additional chain transmission in the coiler, which drives the idler shaft, improves the working parameters during coiling.

Technical parameters:

• Max. sheet thickness: 0.8 mm for Rm & lt; 400 MPa
• Maximum width of a sheet: 1.250 mm
• Diameter of working shafts: 3 x 60 mm
• Minimum diameter of the rolled sheet: 80 mm
• < li> Maximum diameter of the rolled sheet metal: 750 mm
• Weight: 130 kg
• Detachable upper shaft with a milled groove.

Overall dimensions of the machine:

• height - 1.100 mm
• width - 1.800 mm
• depth - 700 mm

The shafts of the winder are driven by a cylindrical gear, manually with a crank.

The coiler elements are made on precise CNC machine tools.

The coiler is covered with a double layer of high-quality paint - the painting process is performed in a professional, heated and ventilated paint shop.