Cilindru hidraulic pentru matrite * V215CR *
a sari
1-1500mm
diametrul pistonului
25-200mm
destin
turnare prin injecție / turnare sub presiune
Trimite cererea
Această ofertă nu mai este activă. Adăugați o întrebare și obțineți oferte de la mai mulți vânzători.
a sari
1-1500mm
diametrul pistonului
25-200mm
destin
turnare prin injecție / turnare sub presiune
The V215CR is a double acting, long stroke, linear motion, single-piston (non-through) hydraulic steering cylinder.
The standard version is produced with a piston diameter from 25 mm to 200 mm and a stroke from 1 mm to 1500 mm.The V215CR hydraulic cylinder consists of 2 heads, a central tube and 4 rods closing the cylinder.
The V215CR hydraulic cylinder complies with the international clamping dimensions UNI ISO 6020/2 Compact.Linear mounting with a wedge is possible from the front and rear head.Front and rear flanges are also available.
Front bushing hydraulic seal system includes scraper, 3 guide strips and 2 Viton O-rings.These elements provide a hydraulic seal with considerable durability and resistance over time.The V215CR is the most versatile actuator available and can be used in a wide variety of industries.
A sensor which generates a strong magnetic field is attached to the piston.The piston stroke of the V215CR hydraulic cylinder can be controlled by adjustable electronic sensors that read the position thanks to a magnetic field.The signal can be sent to the PLC of the plastic injection molding machine.
The maximum temperature of the sensors' resistance is 80 ° C.The maximum hydraulic operating pressure is 215 bar and the maximum speed is 1 m / s.The fluid compatible with the V215CR hydraulic cylinder is ISO VG 46 mineral oil.
Vega offers not only 1 year of official warranty for the actuator, but also ongoing technical support.This long stroke hydraulic cylinder can be delivered in a very short time thanks to the Vega warehouse supply.
It is possible to personalize this product by sending an inquiry to our e-mail address.Every Vega product is tested before it leaves the factory to guarantee efficiency and no problems such as oil leakage.
CATALOG: https://shop.vegacylinders.com/index.php?controller = attachment & amp; id_attachment = 5
The standard version is produced with a piston diameter from 25 mm to 200 mm and a stroke from 1 mm to 1500 mm.The V215CR hydraulic cylinder consists of 2 heads, a central tube and 4 rods closing the cylinder.
The V215CR hydraulic cylinder complies with the international clamping dimensions UNI ISO 6020/2 Compact.Linear mounting with a wedge is possible from the front and rear head.Front and rear flanges are also available.
Front bushing hydraulic seal system includes scraper, 3 guide strips and 2 Viton O-rings.These elements provide a hydraulic seal with considerable durability and resistance over time.The V215CR is the most versatile actuator available and can be used in a wide variety of industries.
A sensor which generates a strong magnetic field is attached to the piston.The piston stroke of the V215CR hydraulic cylinder can be controlled by adjustable electronic sensors that read the position thanks to a magnetic field.The signal can be sent to the PLC of the plastic injection molding machine.
The maximum temperature of the sensors' resistance is 80 ° C.The maximum hydraulic operating pressure is 215 bar and the maximum speed is 1 m / s.The fluid compatible with the V215CR hydraulic cylinder is ISO VG 46 mineral oil.
Vega offers not only 1 year of official warranty for the actuator, but also ongoing technical support.This long stroke hydraulic cylinder can be delivered in a very short time thanks to the Vega warehouse supply.
It is possible to personalize this product by sending an inquiry to our e-mail address.Every Vega product is tested before it leaves the factory to guarantee efficiency and no problems such as oil leakage.
CATALOG: https://shop.vegacylinders.com/index.php?controller = attachment & amp; id_attachment = 5