merXu Protected Payments
Stel je betaling veilig tot de levering.
KANS Seriële buffertank, ketel met VERWARMING 3kW staande SONET, buffer 100L
Aanbod van leverancier:
Land van verzending:
Landen van bestemming:
Geschatte verzenddatum:
Betaalmethoden aanbevolen door merXu:
Alternatieve betalingsmethoden:
Hydraulic clutch
Buffer tank standing for cooperation with the heat pump 100L
with built-in heater 3kW
Insulated.For serial connection
Purpose: buffer tank, intended for cooperation with a heat pump
Application: The standing buffers for heat pumps feature a set of connections , which allow for convenient installation in a heating installation with a heat pump in series.Two hydraulic connections Gw 5/4, equipped with a heater 3kW, input for the temperature sensor probe, air vent and magnesium anode.
Principle of operation : Buffer tanks for heat pumps are a guarantee of safe operation of the heat pump installation.Acting as a hydraulic coupling and load, they enable stable operation of the heating and cooling system, which significantly extends the life of the heat pump and the entire installation.They are used to increase the flow of the heating medium through the heat pump exchanger and when it is required to provide the heating medium for defrosting the evaporator in air heat pumps (through the so-called reverse circulation).There is NO coil.
The technical drawing of the buffer is located in the "Do pobrania", tab Catalog data file.
Key advantages:
- equipped with a 3kW, heater without a thermostat
- for use in heating and cooling systems.
- hydraulic clutch and greater water intake for the heat pump installation
- possibility of installing a temperature sensor, an air vent and a safety valve
- efficient insulation made of polyurethane foam
- durable metal casing
- comfortable installation - standing version
Technical data
https://www.youtube.com/watch?v=d1sV8hgKsHQ
Here is a professional lecture from Panasonic proving that serial connection of the buffer is more effective:
https://www.youtube.com/watch?v=XfmSzN4Dc8s&t=616s This is a high quality product.It has a thick inner wall, thick insulation and a solid inner covering.This buffer is better made than most competitive buffers available on the market. The price is extremely attractive and the number of tanks is limited!
The price is low because the manufacturer made these tanks on our behalf.We skip at least 2 of intermediaries!
NOTE: This buffer can also be used in a parallel connection.Then you need to use a hydraulic clutch, e.g.:
Hydraulic clutch
From our offer.
Buffer tank standing for cooperation with the heat pump 100L
with built-in heater 3kW
Insulated.For serial connection
Purpose: buffer tank, intended for cooperation with a heat pump
Application: The standing buffers for heat pumps feature a set of connections , which allow for convenient installation in a heating installation with a heat pump in series.Two hydraulic connections Gw 5/4, equipped with a heater 3kW, input for the temperature sensor probe, air vent and magnesium anode.
Principle of operation : Buffer tanks for heat pumps are a guarantee of safe operation of the heat pump installation.Acting as a hydraulic coupling and load, they enable stable operation of the heating and cooling system, which significantly extends the life of the heat pump and the entire installation.They are used to increase the flow of the heating medium through the heat pump exchanger and when it is required to provide the heating medium for defrosting the evaporator in air heat pumps (through the so-called reverse circulation).There is NO coil.
The technical drawing of the buffer is located in the "Do pobrania", tab Catalog data file.
Key advantages:
- equipped with a 3kW, heater without a thermostat
- for use in heating and cooling systems.
- hydraulic clutch and greater water intake for the heat pump installation
- possibility of installing a temperature sensor, an air vent and a safety valve
- efficient insulation made of polyurethane foam
- durable metal casing
- comfortable installation - standing version
Technical data
- Heater 3kW
- storage capacity of the central heating tank 100L
- insulation polyurethane foam + external covering with painted sheet metal White color.
- Magnesium anode
- max. tank operating pressure (MPa): 0.3
- max. tank operating temperature (C): 95
- Water circuit connections 2 x 5/4 inch - tank for series connection, recommended installation of a differential pressure valve %p14/ %
- Temperature sensor input 1/2cala
- Tank emptying output 1/2 in.
- Air vent 1/2 in. %p24 /% L – height (mm): 1067
- D - external diameter of the tank (mm): 470
https://www.youtube.com/watch?v=d1sV8hgKsHQ
Here is a professional lecture from Panasonic proving that serial connection of the buffer is more effective:
https://www.youtube.com/watch?v=XfmSzN4Dc8s&t=616s This is a high quality product.It has a thick inner wall, thick insulation and a solid inner covering.This buffer is better made than most competitive buffers available on the market. The price is extremely attractive and the number of tanks is limited!
The price is low because the manufacturer made these tanks on our behalf.We skip at least 2 of intermediaries!
NOTE: This buffer can also be used in a parallel connection.Then you need to use a hydraulic clutch, e.g.:
Hydraulic clutch
From our offer.