MAAD ZW-2000 / 0.6 RULLĪŠU DZESĒŠANAS MAŠĪNAS RULLĪŠI LOŠŠU METĀLAM MAAD ZW-2000 / 0.6mm Ražošanas gads 2020.g.

ROLLER ROLLER ROLLERS FOR SHEET METAL

MAAD ZW-2000 / 0.6mm

Coiler ZW-2000 / 0.6 is a machine for coiling and unrolling cylindrical pipes, tapered pipes with low taper, gutters and all kinds of metal sheets up to 0.60 mm thick and tensile strength Rm up to 400 MPa.

The main working elements of the coiler are 3 shafts.Two of them located in the front part of the machine (upper and lower) perform the function of pulling the rolled sheet metal.The third, at the back of the device, the so-called loose thanks to the adjustment of the position, it gives the appropriate diameter of the processed sheet.The idler roller is supported by two roller carriages mounted on the bogie frame, which moves with the roller during its adjustment.Such a design solution prevents the shaft from deforming during sheet coiling.

Thanks to the additional milling in the upper shaft, it is possible to make locks for downpipes on the winder.The upper shaft, detachable on one side, allows for quick removal of the workpiece.An additional chain transmission in the coiler, which drives the idler shaft, improves the working parameters during coiling.

The coiler shafts are driven manually by a cylindrical gear with a crank.

Technical parameters:

• Max. sheet thickness: 0.6 mm for Rm & lt; 400 MPa
• Maximum width of a sheet metal: 2.050 mm
• Diameter of working shafts: 1 x 65 mm, 2 x 90 mm
• Minimum diameter of a rolled sheet: 100 mm
• Maximum diameter of the rolled sheet: 1000 mm
• Weight: 440 kg

Machine dimensions:

• height - 1.100 mm
• width - 2.550 mm
• depth - 700 mm
• Removable upper shaft with a milled groove.Additional support for the rear shaft - gutters and pipes perfectly straight!

The coiler elements are made on precise CNC machine tools.

The machine is covered with a double layer of high-quality paint - the painting process is performed in a professional, heated and ventilated paint shop.