ADELID pārsprieguma novadītājs 3faz B+C 4P OPX

SURGE LIMITER CLASS (T1+T2) B+C 4P 6kA

ADELID OPX % p11/%

(THREE-PHASE)

TECHNICAL DATA:

Model - OPX-B+C

Protection class - T1+T2 (B+C)

Compliance with requirements - class I+II

Version - varistor

Poles - %p43/ %

Protection required - 32A

Connections max - 35mm2 %p54/ %

Maximum operating voltage - Uc 385 V AC

Test current (8/20) In - %p64 /%

Max. current (8/20) Imax - 60kA

Voltage protection level - 1,5 kV

%p78/ % Assembly - rail 35mm

Storage temperature - -30/+70°C

Operating ambient temperature - -30/+50°C

Tightness class - IP 20

Surge arresters class B+C: %p99 /%

- They are dedicated to protecting LV power supply installations against the effects of induced and switching overvoltages.They can be installed in networks such as: TN, TNC, TNCS, TNS, TT.

- They should be used as both the first and second level of protection in floor boards and sub-distributions.The arresters should be installed at the points where the electrical installation enters the building.

- They provide complete protection of the electrical installation and the electrical devices supplied from it against the effects of part of the lightning current and other types of overvoltages.

- They reduce overvoltages and bring surge currents from both types of overvoltages - direct and indirect - to the ground.They also provide a two-stage level of protection.

- Provide effective protection for computers, electronics/home appliances, etc.

- They are equipped with a visual operation indicator (green - protection, red - no protection).

SURGE PROTECTORS ARE EQUIPPED WITH A VISUAL OPERATION INDICATOR:

• green – protection

  %p9 /%

• red –  no protection