Staffa per centrale elettrica da balcone per balcone e recinzione - set per modulo fotovoltaico 1.
The mounting kit for balcony railings is perfect for mounting on handrails with a round diameter of 30 to 55 mm or square handrails of 30 to 41 mm.The fastening of the holders ensures sufficient stability.The protective strips between the handrail and the mounting bracket ensure gentle installation without scratches and damage.
The assembly:
After you have assembled the mounting set using the assembly instructions, the bracket must be hooked onto the fence or balcony railing.
The lower hook must then be aligned so that the bracket sits firmly on the fence/railing.
In the final step, the PV module is inserted into the lower hook and securely mounted at the top using an end clamp.
Included in the set:
-
2 x Mounting rail type 1 – 1,2 m
-
4 x End caps black
-
4 x Hooks for railing or fence
-
8 x Hexagon screws M10 x 20 mm
-
8 x Locking nut M10
-
4 x EPDM strip
-
2 x Hooks for PV module
-
8 x Cylinder head screws M8 x 16 mm
-
10 x T-slot nut type 1
-
2 x End clamps black
-
2 x Cylinder head screws M8 x 30 mm or 35 mm
-
1 x PV cable clips with cable ties