Rotenso Airmi AIS80X13i Pompa di Calore Split 8kW 1F Int.
Rotenso Airmi Split 8 kW heat pump consists of:
- internal unit: hydraulic module with the symbol AIS80X13i
- outdoor unit with the symbol: AISW80X1o (white housing) or AISB80X1o (graphite housing) or AISG80X1o (gray housing)
It is a single-phase pump with a heating capacity of 7,90 kW (A7/W35) and a high energy efficiency class of A+++ (for a supply temperature of 35°) and A++ (for a supply temperature of 55°).COP for parameter A7/W35 is 4,52.
The pump allows you to control two heating zones.
Provides high heating efficiency up to outdoor temperature -25°C.
The maximum available water temperature in heating mode is: 65°C and in DHW mode: 60°C.
The pump has an inverter, two-rotary compressor.Refrigerant is R32.
The Rotenso Airmi Split heat pump is equipped with a booster heater 9 kW with modulated power (3 kW +3 kW + 3 kW).In emergency situations or at temperatures below the bivalent point, it is advisable for the pump to use booster heaters when preparing central heating or domestic hot water.It is worth knowing that the use of heaters has a positive effect on the durability and reliability of the heat pump.
To ensure trouble-free operation at temperatures below 0°C the pump is equipped with a drip tray heater which protects against freezing of condensate and icing of the external unit, thus preventing possible damage to the heat pump fan and exchanger.
The second important element of the pump equipment is the compressor crankcase heater, which heats the compressor oil at temperatures below 0°, preparing the device for trouble-free start-up in unfavorable weather conditions.
This technical solution guarantees failure-free operation and extends the life of the compressor - the heart of the heat pump.
The Rotenso Airmi Split pump can be controlled using a mobile application (Tuya Smart) as well as a modern wired controller with a menu in Polish, which has a built-in room temperature sensor and a Wi-Fi module.
The pumps have a 5 one-year warranty.The buyer is provided with professional service and warranty care.The manufacturer ensures free start-up of the pump by an authorized service, access to a nationwide service network and quick service response time.
The Rotenso Airmi Split 8 kW set includes:
- internal unit AIS80X13i
- external unit: AISW80X1o (white housing) or AISB80X1o (graphite housing) or AISG80X1o (gray housing)
- wired controller
- DHW tank sensor
- plate exchanger
- flow sensor
- expansion vessel
- pressure gauge
- The water pump
- safety valve
- vent valve
- Y type water filter
Specification:
- Model: AIS80X13i
- Rotenso series: Airmi
- Compatible outdoor unit model: AIS/W/B/G/80X1o
- Operation mode: Heating and cooling
- Outlet water temperature / Room cooling (°C): 7~25
- Outlet water temperature / Room heating (°C): 25~65
- Outlet water temperature \ DHW (tank) (°C): 25~60
- Power supply (V-Hz, Ø): 380-415~50, 3f
- Power consumption (W): 9090
- Operating current (A): 13,9
- Sound power level (dB(A)): 42
- Electric heater \ Power supply (V-Hz, Ø): 380-415~50, 3f
- Electric heater \ Number of heating levels (pcs): 3
- Electric heater \ Power (kW): 9
- Electric heater \ Maximum operating current (A): 13.6
- Net dimensions (WxDxH) (mm): 465 × 273 × 909
- Gross dimensions (WxDxH) (mm): 525 × 345 × 960
- Net weight \ Gross weight (kg): 37 / 41
- Water circuit \ Water connections (mm( (inch)): Φ33
- Water circuit \ Safety valve pressure (MPa): 0,5
- Water circuit \ Condensate drain (mm): Φ12,7
- Water circuit \ Expansion vessel \ Total capacity (l): 5
- Water circuit \ Expansion vessel \ Usable capacity (l): 2
- Water circuit \ Expansion vessel \ Maximum pressure (MPa): 0,5
- Water circuit \ Expansion vessel \ Preliminary pressure: 0,15
- Water circuit \ Heat exchanger / Type: Plate exchanger
- Water circuit \ Heat exchanger / Minimum flow (l/min): 10
- Water circuit \ Water pump lifting height (m): 9
- Water circuit \ Water pump type: DC inverter
- Refrigerant circuit / Liquid / Gas (mm): Ф9,52 / Ф15,88
- Power cables: indoor unit (no. x mm²): 5 × 4
- Control cables: indoor unit-ext.(no. x mm²): 2 × 0,75 (shielded)
- Generation: X