INTERRUTTORE DI PROTEZIONE ANTINCENDIO INTERRUTTORE DI CORRENTE THINKWE FIRE 4xDC circuiti fotovoltaici

The THINKWE fire protection switch (pronounced -TIMQI) is a device used to connect and disconnect direct voltage from photovoltaic panels

The advantage is the metal housing.

It is controlled automatically by the AC network.

The purpose of the switch is to disconnect the DC circuit when the AC power supply is interrupted and to automatically reconnect the DC circuit when the AC power supply is restored.

This situation occurs in the event of a power grid failure or intentional power cut-off to a building when there is a fire hazard.

The fire protection switch does not require maintenance and is fully automatic

A correctly installed switch will obtain a positive opinion from fire protection experts and meets the provisions of the amendment to the Act

Construction Law, which came into force on 19 September 2020 for photovoltaic installations with a capacity of more than 6,5 kWp.

An additional advantage of the THINKWE solution is the possibility of installing the disconnector without disassembling it or opening the housing to connect the wires

This shortens the installation time of the disconnector to a minimum.

For manual (emergency) switching off, a fire protection button with NC contact is required (additionally available on request.)

Very good mechanical and electronic design

Powder coated metal housing - Hermetic

Technical support

Disconnectors available 2-3-4-5-6-7-8-9-10 circuits - strings, with a set of plugs MC4

User manual and catalog card for download www.thinkwe.pl

CE certificate

Technical parameters :

Number of PV panel circuits: 4

Number of input pairs: 4

Number of output pairs: 4

Voltage range: DC 600V - 1500V - (600 V 40 A ,1000 V 40 A , 1500 V 26 A)

Current range: DC 26A - 40A - (600 V 40 A ,1000 V 40 A , 1500 V 26 A)

AC voltage range: 100V - 270V

Rated current: 30 mA

Inrush current of the disconnector: ~ 100 mA

Operating current: Max 300 mA

Auxiliary contact: 24 V DC - 300 mA max

Operating temperature range: -20?to +70?

Maximum operating temperature before automatic shutdown" +70?

Storage temperature range: -40?to +85?

Type of protection: IP 66

Protection level: Class II

Certification: CE

DC disconnector in accordance with the standard: EN 60947-1 and 3

Number of operations: above 10 000

Pursuant to the Act on Consumer Rights of 30 May 2014, the buyer has 14 days from the date of receipt of the goods to send a declaration of withdrawal from the contract