merXu Protected Payments
Assicurare il pagamento fino alla consegna.
Accumulo di energia, batteria SONET 10kWh/48V modello LiFePo4 16S
1.674,65 €
+IVA
7.153,66 PLN
Prezzo
1.674,65 €
+IVA
7.153,66 PLN
1
×
7.153,66 PLN
+IVA
(1
pc.)
MOV:
1.000,00 PLN
Questo venditore risponde rapidamente
Offerta del fornitore:
Paese di spedizione:
Paesi di destinazione:
Data di spedizione prevista:
Metodi di pagamento consigliati da merXu:
Metodi di pagamento alternativi:
SONET brand energy storage with a capacity of 10kWh.
51,2V
Lithium Iron Phosphate LiFePO LFP. 16 cell (16S)
Of course, equipped with its own BMS.
Amazing price and parameters.We recommend to work with off-grid inverters DEYE, ESB, SRNE, PowMr
This magazine can be laid flat on a sturdy table, placed in a rack on a shelf (no rack mount), or hung on a wall.The set includes accessories for hanging on the wall.
The magazine is equipped with an LCD display providing precise information about the status of the entire battery and individual cells.You can see: total capacity, usable capacity, total voltage and individual cell voltages, current discharge or charge current, internal temperatures, etc.
Dimensions when lying flat: 600 depth x 420 width x 210mm height.
The actual product may differ slightly from the one shown in the photo.
This magazine was made to our order in one of the largest factories in China.This factory produces energy storage for many brands but also in OEM version. Thanks to this it can offer affordable price.
We have a laboratory with equipment for testing batteries.We have also tested this product and it meets the declared parameters.
Technical data:
Capacity 200Ah
Energy 10,24kWh
Voltage range: 43,2 - 57,6V DC
Charge and discharge current: 100A
Operating temperature: 0-55 degrees C
Weight 50kg
Distributor warranty 5 years.
6000 cycles with minimum final capacity 70%, assumed discharge rate to 90%.
1.This magazine has a shelf life of at least 8-krotnie greater than typical AGM or GEL!
2.The safe charging and discharging current for GEL/AGM batteries is 20A.Here you can achieve 50A discharge and 50A charge
3.The weight of this package is only 50kg., the weight of 4 of the GEL/AGM battery is 120 kg in total!
4.Manufacturer's warranty for 6000 cycles and 10 years for final capacity 70% of original
NOTE: the durability of batteries is greatly influenced by the degree of load.Batteries heavily loaded, i.e. from 0 to 100% and with full permissible current, have reduced durability.
Therefore, to achieve the durability of 6000 cycles, we do not discharge completely, but leave at least 10% energy, we do not charge to 100%,, but we charge to 90% energy (i.e. in practice we use 80% capacity, i.e. 4,6kWh, let's load the current no higher than 0,5C (i.e. 50A).We avoid negative temperatures.
Communication is set in the inverter, if it has such capabilities.The instructions for the energy storage device include a list of compatible inverters.However, the CAN protocol in which communication is to occur is not fully standardized and certain commands do not work by design. Therefore, we always recommend setting the battery parameters in the inverter manually.This ensures proper operation.In extreme cases, CAN communication may incorrectly read the battery and, as a result, lead to incorrect use (e.g. constant maintenance of the minimum voltage, which has a negative impact on durability, or constant recharging to the maximum).
NOTE: Due to cost, weight and safety reasons, we only ship these energy storage units on pallets/half pallets
51,2V
Lithium Iron Phosphate LiFePO LFP. 16 cell (16S)
Of course, equipped with its own BMS.
Amazing price and parameters.We recommend to work with off-grid inverters DEYE, ESB, SRNE, PowMr
This magazine can be laid flat on a sturdy table, placed in a rack on a shelf (no rack mount), or hung on a wall.The set includes accessories for hanging on the wall.
The magazine is equipped with an LCD display providing precise information about the status of the entire battery and individual cells.You can see: total capacity, usable capacity, total voltage and individual cell voltages, current discharge or charge current, internal temperatures, etc.
Dimensions when lying flat: 600 depth x 420 width x 210mm height.
The actual product may differ slightly from the one shown in the photo.
This magazine was made to our order in one of the largest factories in China.This factory produces energy storage for many brands but also in OEM version. Thanks to this it can offer affordable price.
We have a laboratory with equipment for testing batteries.We have also tested this product and it meets the declared parameters.
Technical data:
Capacity 200Ah
Energy 10,24kWh
Voltage range: 43,2 - 57,6V DC
Charge and discharge current: 100A
Operating temperature: 0-55 degrees C
Weight 50kg
Distributor warranty 5 years.
6000 cycles with minimum final capacity 70%, assumed discharge rate to 90%.
1.This magazine has a shelf life of at least 8-krotnie greater than typical AGM or GEL!
2.The safe charging and discharging current for GEL/AGM batteries is 20A.Here you can achieve 50A discharge and 50A charge
3.The weight of this package is only 50kg., the weight of 4 of the GEL/AGM battery is 120 kg in total!
4.Manufacturer's warranty for 6000 cycles and 10 years for final capacity 70% of original
NOTE: the durability of batteries is greatly influenced by the degree of load.Batteries heavily loaded, i.e. from 0 to 100% and with full permissible current, have reduced durability.
Therefore, to achieve the durability of 6000 cycles, we do not discharge completely, but leave at least 10% energy, we do not charge to 100%,, but we charge to 90% energy (i.e. in practice we use 80% capacity, i.e. 4,6kWh, let's load the current no higher than 0,5C (i.e. 50A).We avoid negative temperatures.
Communication is set in the inverter, if it has such capabilities.The instructions for the energy storage device include a list of compatible inverters.However, the CAN protocol in which communication is to occur is not fully standardized and certain commands do not work by design. Therefore, we always recommend setting the battery parameters in the inverter manually.This ensures proper operation.In extreme cases, CAN communication may incorrectly read the battery and, as a result, lead to incorrect use (e.g. constant maintenance of the minimum voltage, which has a negative impact on durability, or constant recharging to the maximum).
NOTE: Due to cost, weight and safety reasons, we only ship these energy storage units on pallets/half pallets