RACK kit - Spremanje energije 5.12 kWh Victron Energy

We present you a ready-assembled energy storage system built in a RACK cabinet with a power of 3kVA Inverter and 5,12 kWh Energy Storage.

Energy Storage System and its purpose:

• For an existing installation photovoltaic, to expand your system with an energy storage facility.

• used as a stand-alone off-grid system cooperating with the grid and own off-grid PV installation (optional)

• %p7 /% Provides an uninterrupted supply of energy thanks to the UPS function

• Possibility of expanding the installation in the future.

• For people who have electric or hybrid cars.

• For installation to reduce peak loads

• In energy management systems from anywhere on earth %p8/ %

• In off-grid systems (island without support)

• Possibility to add a photovoltaic generator to the system

  % p17/%

ADVANTAGES OF THE SYSTEM

This intelligent system will allow you to maximize the use of the energy generated by your photovoltaic installation.Surplus energy, which in a standard grid photovoltaic installation would be sent to the Public Power Grid, can finally be stored and used at times when the production from the Sun is lower (or its absence, e.g. at night, in the evening, early in the morning or during heavy cloud cover). .This maintenance-free solution allows you to accelerate the return on investment in photovoltaics.The undoubted advantage of this solution is the ability to switch to island operation mode in the event of a voltage failure in the Power Grid.Additional independence can be increased by using your own PV installation in the system, connected directly to the MultiPlus inverter using a properly adapted charge controller. This allows you to increase your independence from electricity supplies up to 100%.Forget about power outages.

Set composition Energy storage

• 1 x Multiplus-II Inverter  48/3000KVA

• Cerbo Gx System Controller

• Battery LifePo4  5,12 kWh

• 1 x RACK mounting cabinet

• 1x GX Touch display %p30/ %

• 1 x Battery Cable Kit

• 1 x Interface %p41 /%

• 1 x Counter  ET340 for inverter measurement

• 1 x Victron fuse base

• %p57/ % x Overcurrent protections

• 1 x Main switch + Fuse

Co you gain

·         technical support with connection and constant access to system preview in the Victron Energy VRM application

·         possibility of expanding the system with additional photovoltaic panels or installing a generator

·         possibility of configuring the set at any time

After placing the purchase order, the system is assembled, tested and prepared for shipment.If you need more information or would like to change the system configuration before purchasing, call or write, we will help you adjust the size of the devices to your or your client's needs.

The shipping cost is determined during the purchase process and depends on the place of delivery of the system

%p8/ %