merXu
Otkazati
merXu Protected Payments
Osigurajte svoje plaćanje do isporuke.
NET ROUTER/SWITCH 16PORT SFP/CRS518-16XS-2XQ-RM MIKROTIK

NET ROUTER/SWITCH 16PORT SFP/CRS518-16XS-2XQ-RM MIKROTIK

Šifra proizvođača
CRS518-16XS-2XQ-RM
EAN
4752224007438
Cijena po dogovoru
Kontaktirajte dobavljača radi dogovora o cijeni.
Ponuda dobavljača:
Prijavite se kako biste vidjeli detalje dobavljača
Provjereno
Zemlja otpreme:
Poljska
Zemlje odredišta:
+26 više
Metode plaćanja koje preporučuje merXu:
Rreporučeno od merXu
merXu Protected Payments
merXu Protected Payments
Osigurajte svoje plaćanje do isporuke. Besplatno.
Saznajte više
merXu Pay
merXu Pay
Kupite sada, platite nakon 30 dana. Besplatno.
Saznajte više
Alternativni načini plaćanja:
Blik
Kreditna/debitna kartica
Online bankarstvo
Žični prijenos
Parametri
Šifra proizvođača
CRS518-16XS-2XQ-RM
EAN
4752224007438
Opis
As our 100 Gigabit product family grows, the time has come to introduce a serious enterprise-level switch. A switch that is up for the challenge when the CRS504 port density is just not enough. Introducing the spectacular CRS518-16XS-2XQ!  With 2x 100 Gigabit QSFP28 ports and 16x 25 Gigabit SFP28 ports, this is the perfect cost-effective addition to any enterprise network or data center. And with dual-redundant hot-swappable power supplies and fans, you won’t have to worry about unnecessary downtime.  Here’s a real-life setup – similar to the one we’re using in our office:  At the top, you could place two flagship CCR2216 routers to provide the main connectivity and routing. Then a blazing-fast 100 Gigabit connection leads to three CRS518 distribution level switches. This is where all the magic happens. The CRS518 switches connect every access level device to the main network, deal with traffic filtering, and network policy enforcement. And they handle all that with grace and dignity – thanks to the fantastic Marvell Prestera Aldrin2 switch-chip. The same chip you’ve seen in our flagship CCR2216 that did wonders with L3 Hardware Offloading.  The 25-gigabit ports are backward compatible with 10 Gigabit and 1 Gigabit SFP devices. Mix and match as you need!  The two hot-swap power supplies support a high input voltage range: 100-240V. The board itself uses up to 45W of power, while the total maximum power consumption goes up to 77W with all the attachments. It can be a bit more power-hungry than the CRS504, but you would be too if you had 16x 25-Gigabit ports, wouldn’t you?  Our 100 Gigabit product family keeps growing: switches, routers, cables, and QSFP28 modules. If you want real speed and ultimate flexibility for the best price on the market – you want MikroTik!  Nothing can stop this switch: it supports VLAN (802.1Q, 802.1ad), L3 hardware offloaded routing, ACL, LACP, MLAG, Jumbo frames, IGMP/MLD snooping, and so on. Keep your RouterOS up to date and enjoy the real power of CRS!

Novi ste u kupovini na merXu?

Jednostavnije je nego mislite. Pružamo vam korak-po-korak vodič

Pregovarajte s prodavateljem.

Možete kontaktirati prodavatelja kako biste prilagodili svoju narudžbu, pregovarali o cijeni ili se raspitali o drugim ponudama iz njihovog portfelja prije nego što obavite kupnju. Odaberite i kliknite na ponudu koja vas zanima. Pronađite gumb "POŠALJI UPIT" s desne strane ponude i bit ćete preusmjereni izravno na chat s prodavateljem

Jedan zahtjev, više ponuda
Napravite upit tako što ćete dobavljaču reći što trebate.