EPEVER PRETVARAČ NAPONA IPT1500-12(E) 12V/1500W

EPEVER VOLTAGE CONVERTER IPT1500-12(E) 12V/1500W

The IPT series products are advanced sine wave inverters that enable the conversion of voltage 12VDC to 220/230VAC.These devices are perfect for photovoltaic systems, offering a wide input voltage range.This makes them versatile and can power a variety of devices, including lighting, equipment in campers and caravans, as well as smaller photovoltaic installations.They are a reliable solution for customers looking for a stable and flexible power source in various applications.

Main Features

Pure sine wave output

Compliant with EN/IEC62109-1/2, EN61000-6-2/4 and FCC standards.

Input protection: low voltage, high voltage

Output power factor to 1

External switch system allows for expansion of the inverter control function and reduction power consumption

Communication port RS485 for remote monitoring

Output protection: overload, short circuit, overheating

Electrical isolation between input and output % p14/%

Diversified AC Output Sockets

Specification

Continuous Output Power  1500W

Peak Power  % p24/% 3000W@5S

Output voltage 220VAC (±3%); 230VAC (-7%~+3%)

% p36/% Output frequency 50/60Hz ± 0.2%

Output signal Pure sine wave

%p46/ % Output Signal Distortion THD  THD ≤ 3% (Resistive Load)

Load Power Factor  0,2 ~ 1 (Power Factor loads ≤ Continuous output power)

Nominal input voltage  12VDC

Input voltage range %p64 /% ~ 16.0VDC

Nominal output efficiency  > 89.0%

Maximum output efficiency  > 90.0%(Obciążenie 30%)

Idle Current < 0.2A

No-load current < 1.2A

Communication port RS485 5VDC/200mA

Input terminal  %p97 /%

Dimensions (L x W x H) 387 × 228 × 118mm

%p107 /% Mounting dimensions  361 × 145mm

Mounting hole size Φ6mm

%p118 /% Weight 4.8kg

Operating temperature -20℃ ~ +60℃ 

Storage Temperature  -35 ℃ ~ +70 ℃

Relative Humidity ≤ 95% (N.C.)

Enclosure IP20

Height  < 5000m (If the height exceeds 1000 meters, the rated power will be reduced according to the standard IEC62040.)