Riel corto - chapa trapezoidal - 400x90x30mm - con patrón de agujeros y EPDM
Short rail – trapezoidal sheet metal – 400x90x30mm – with hole pattern and EPDM
Length: 400 mm
Thickness: 1,6 mm
Weight/piece: 0,38 kg
Weight/m: 0,921 kg/m
Length x width x height: 400 x 90 x 31,6 mm
Upper channel: %p27/ % PV module installation (M8)
Module installation: portrait
Max.Distance between high beading: 360 mm
Material: aluminum EN AW-6060 T66
%p10 /% mounting rail – trapezoidal sheet metal in 400x90x30mm with a thickness of 1,6 mm and a weight of 0,38 kg.
There are drilling grooves on the sides for easier installation with self-tapping sheet metal screws.The already available hole pattern simplifies installation on site.
The height of 31,6 mm results in simplified cable routing during installation and sufficient rear ventilation of the PV modules.
The trapezoidal rail comes with an EPDM seal already attached.
The mounting rail – trapezoidal sheet metal can be used for trapezoidal sheet metal with a maximum bead spacing of 360 mm.
According to DIN 1090-4, the sheet thickness of the trapezoidal sheet should be at least 0,75 mm.For smaller sheet metal thicknesses, the use of hanger bolts should be considered as an alternative.
You can find associated data sheets and assembly instructions within the item description.
The mounting rail - trapezoidal sheet metal can be found in the shop as an alternative, blank or with a hole pattern.