Aerogenerador horizontal Rofonatura PRO 2.5/3.2Kwh + pértiga 12m kit completo
Rofonatura-PRO Horizontal Wind Turbine 2.5/3.2 kWh with controller and dumpload (unloader)
The wind turbine can produce 24h/24h, attached to a hybrid photovoltaic system with batteries of %p5/ %It is easily connected to the batteries thanks to the controller.
Works with hybrid system 48Vdc, on-grid or off-grid.
Controller 48Vdc with dumpload (unloader) set for Gel/Acid batteries at 58V- for other types of batteries the desired value can be set.
Turbine fastening system on 89mm diameter pipe.
Higher production performance than vertical turbines.
Check all product pictures.
Ideal for areas with constant wind intensity, for cottages in the hill-mountain area, for homes, farms, isolated without access to the network.
The first element we have to take into account is the wind potential of the area where we want to install it.
- the height at which it is mounted compared to the ground surface - high area mounting, the wind speed when measured and recorded is given at 10 m height compared to ground
- avoiding possible obstacles around - trees, buildings, other constructions.
Complete kit with a pole of 12 meters for the Rofonatura-PRO wind turbine 2.5/3.2kwh.
Rotor diameter 3.8m
Material and number of blades - Reinforced glass fiber x 3
Rated power/Maximum power - 2.5/3.2 Kwh
Production speed - 9m/s
Starting speed - 2.5m/s
Production interval - 3-25m/s
Maximum working speed - 45m/s
Rotational speed - 320r/min
Working voltage - % p26/%
Generator model - 3 permanent magnet phases
Weight 85 Kg
Pole height 9-12 m
Battery capacity recommendation 48Vdc/200Ah
Operating time 15 years
Pole 12 meters
% p46/% Composed of 4 sections of 3 meters each.Pipe diameter 89mm.
Ground attachment through hinge-folding pole.
Includes all mounting accessories:
- ground hinge
- 4 concrete hinge anchors
- 4 steel cords for fastening
- 4 tensioners for steel cords
- 4 concrete anchors for cords % p16/%
- screws and nuts for fastening sections