merXu Protected Payments
Secure your payment until delivery.
Valve module (8 valves) LEVEL 6
Manufacturer Code
mH-V8-6
EAN
5908312594758
Width
0.105
Weight
0.215
Depth
0.104
Height
0.075
Show more
Request for quotes
This offer is not active anymore. Add an inquiry and get offers from multiple sellers.
Offer from supplier:
Other sellers offer this product
Manufacturer Code
mH-V8-6
EAN
5908312594758
Width
0.105
Weight
0.215
Depth
0.104
Height
0.075
Kod CN
85364900
PKWiU
27.12.24.0
The mH-V8 module is an eight-channel actuator module that controls the operation of solenoid valves connected to the module's outputs and is designed to work with mH-S8 temperature sensor modules.The module is mounted in a switchgear and takes up a field of 5 modules, and the module supply voltage is 230 VAC.The module is suitable for controlling solenoid valves in heating circuits (usually installed on the collector) with a coil voltage of 230 VAC and works on an on-off basis, regardless of the main touch panel (it is an autonomous pair with the mH-S8 module located on the same level).If you need to connect more temperature sensors, you can use several mH-V8 modules, but remember that they must be modules of subsequent levels (mH-V8 - level 1, mH-V8-level 2, ...).Inputs / outputs The mH-V8 module is offered in various levels, thus enabling the expansion of the network of inputs / outputs connected to the F & amp; Home system.Install the module from level 1 first, then from level 2, etc.Each level has a separate numbering, which ensures easier installation of the installation.The list of outputs for the mH-V8 module is presented in the table below.Principle of operation The mH-V8 executive module is controlled via the CAN network from the mH-S8 sensor module located on the same level.Depending on the set work program and temperature indications at a given sensor input, the appropriate mH-V8 module output will be triggered.A pair of mH-S8 - mH-V8 modules works independently of the main touch panel, which is used only to establish the work program.Damage or lack of the touch panel does not stop the temperature control system operation.