merXu
Cancel

Valve module (8 valves) LEVEL 3

PKWiU
27.12.24.0
Depth
0.104
CN code
85364900
GTU
Does not apply
Height
0.075
Weight
0.215
Show more
PLN 597.80
€132.17
1 pc.
PLN 597.80 +VAT
€132.17
1 ×
PLN 597.80
(1 pc. )
  • Check before buy
  • Full flexibility
  • Free assistance
  • Minimum order volume 1 pc.
  • Country of dispatch Poland
  • Destination countries Poland
  • Estimated shipping date 2/22/2022 (within 21 working days)
E
verified supplier
ecoELEKTRO Adam Kozłowski
Contact supplier
See all offers
see report
Parameters
PKWiU
27.12.24.0
Depth
0.104
CN code
85364900
GTU
Does not apply
Height
0.075
Weight
0.215
MPP
Does not apply
Width
0.105
dispatch country
PL
EDI
EDI
EAN
5908312593744
Manufacturer Code
mH-V8-3
Description
The mH-V8 module is an eight-channel actuator module that controls the operation of solenoid valves connected to the module's outputs and is designed to work with mH-S8 temperature sensor modules.The module is mounted in a switchgear and takes up a field of 5 modules, and the module supply voltage is 230 VAC.The module is suitable for controlling solenoid valves in heating circuits (usually installed on the collector) with a coil voltage of 230 VAC and works on an on-off basis, regardless of the main touch panel (it is an autonomous pair with the mH-S8 module located on the same level).If you need to connect more temperature sensors, you can use several mH-V8 modules, but remember that they must be modules of subsequent levels (mH-V8 - level 1, mH-V8-level 2, ...).Inputs / outputs The mH-V8 module is offered in various levels, thus enabling the expansion of the network of inputs / outputs connected to the F & amp; Home system.Install the module from level 1 first, then from level 2, etc.Each level has a separate numbering, which ensures easier installation of the installation.The list of outputs for the mH-V8 module is presented in the table below.Principle of operation The mH-V8 executive module is controlled via the CAN network from the mH-S8 sensor module located on the same level.Depending on the set work program and temperature indications at a given sensor input, the appropriate mH-V8 module output will be triggered.A pair of mH-S8 - mH-V8 modules works independently of the main touch panel, which is used only to establish the work program.Damage or lack of the touch panel does not stop the temperature control system operation.