Electronic temperature controller with underfloor sensor in silver metallic KARLIK FLEXI 7FRT-1
Technical data
- IP 20 protection degree
- Power 230 V ~ 50 Hz
- Load range 3200 W
- Continuous operation mode
- Smooth regulation type
- Regulation range 5 ÷ 40 ° C </ li >
- UV resistance Resistant
- Probe length 3 m
- Maximum cable length type: 50 m / 2 x 0.2 ÷ 1 mm2
- Element sensor measuring thermistor NTC 10K 1%
- Sensor operating temperature -10 / 100 ° C
- Protection degree of the sensor IP 67
FLEXI series products sold they are with an external frame, as a "monoblock" system with the possibility of creating any multiple systems vertically or horizontally.For this purpose, there is no need to purchase additional multiple outer frames.Thanks to the innovatively designed outer frame, it is enough to remove its side and use a "tongue" and "groove" to connect any number of frames with each other.
Frames should be assembled without mechanisms.
The electronic temperature controller allows you to maintain the set floor temperature automatically.Each of the circuits constitutes an independent heating system that can be individually programmed.This is especially important when electric or water underfloor heating is the only heating system.
Note!In the case of a sensor with other parameters, there is a risk that the device will work incorrectly or with lower accuracy.