Electronic temperature controller with underfloor sensor, graphite KARLIK FLEXI 11FRT-1
Technical data
- IP 20 protection degree
- Power 230V ~ 50 Hz
- Load range 3200 W
- Kind of continuous operation
- Kind of smooth regulation
- Regulation range 5 ÷ 40 ° C
- UV resistance Resistant
- Probe length 3 m
- Maximum cable length type: 50 m / 2 x 0.2 ÷ 1 mm2
- Measuring element sensor NTC 10K thermistor 1%
- Sensor operating temperature -10 / 100 ° C
- Protection degree of the sensor IP 67
FLEXI series products are sold with an external frame, as a "monoblock" system with the possibility of creating any multiple vertically or horizontallyFor this purpose, there is no need to purchase additional multiple outer frames.Thanks to the innovatively designed outer frame, it is enough to remove its side and use a "tongue" and "groove" to connect any number of frames with each other.
Frames should be assembled without mechanisms.
The electronic temperature controller allows you to maintain the set floor temperature automatically.Each of the circuits constitutes an independent heating system that can be individually programmed.This is especially important when electric or water underfloor heating is the only heating system.
Note!In the case of a sensor with other parameters, there is a risk that the device will work incorrectly or with lower accuracy.