System F5 - Fire protection access hatch for the walls of EI30 shafts / pre-walls
Product description:
The inspection hatch consists of aluminum profiles with a DG TYPE (GKF) 25 mm (F 30) plasterboard insert.Both frames of the inspection hatch consist of four parts connected to each other by a special welding method.The flaps are secured against falling out in the form of a rope.To prevent possible falls, hang them each time you open the door leaf.There is a 1.5 mm wide gap between the frame and the door leaf, filled all around with a fire (foam) seal.Two covered latch locks open the hatch when pressed.
Additionally, the inspection hatches can be equipped (an additional variant) with a square or round cylinder lock.
Application :
For non-load-bearing walls of installation shafts / pre-walls with fire resistance range F30 / EI 30.
Standard dimensions for 25 mm plasterboard insert with EI30 fire protection requirements:
Article numberABCDE BS200200G250 200 < / strong> 200 25 28 40 BS300300 G250 </ strong > 300 300 25 28 40 BS400400 G250 < / strong> 400 400 25 28 40 BS500500 G250 500 500 25 28 40 < / strong> BS600600G250 600 600 25 28 > 40 D = 55mmOn request, we can make dampers of various sizes
Special general advantages of our system:
- attractive price
- short term delivery
- quick, easy assembly
- technically advanced solution single-plane installation in the walls of installation shafts / pre-walls
- can be covered with ceramic tiles
- possibility of installation in the walls of installation shafts from different manufacturers
- available in five sizes for choice (sizes up to 1.5 m2 available on request)
Technical Approval AT-15-7848 / 2011
Certificate of Conformity ITB-2090 / W