System F5 - Fire protection access hatch for shaft walls / EI60 walls
Product description:
The inspection hatch consists of aluminum profiles with a 30 mm GKF (EI60) plasterboard insert.Both frames of the inspection hatch consist of four parts connected by a special welding method.The flaps have two protection against falling out in the form of chains.To prevent possible accidents, hang them each time you open the door leaf.There is a 2.5 mm wide gap between the frame and the sash and it is filled around the entire perimeter with a fireproof foam seal.Two hidden latch locks open the hatch when pressed.
Additionally, the inspection hatches can be equipped (an additional variant) with a square or round cylinder lock.
Application :
In non-load-bearing walls of installation shafts / pre-walls with resistance class EI60 with a 30 mm cladding on one side.In massive walls with fire resistance EI60.
Standard dimensions for 25 mm plasterboard insert with EI30 fire protection requirements:
Article numberABCDE BS200200G300 200 < / strong> 200 30 55 40 BS300300 G300 </ strong > 300 300 30 55 40 BS400400 G300 < / strong> 400 400 30 55 40 BS500500 G300 500 500 30 55 40 < / strong> BS600600G300 600 600 30 55 </ strong > 40 On request, we can make dampers of various sizesOur special advantages ego system:
- attractive price
- short term delivery
- quick, easy assembly
- solution technically advanced single-plane installation in the walls of installation shafts / pre-walls
- can be clad with ceramic tiles
- possibility of installation in the walls of installation shafts of different manufacturers sizes up to 1.5 m2 available on request)
Installation film:
Technical Approval AT-15-7848 / 2011
ITB-2090 / W Certificate of Conformity