merXu
Cancel

Sludge storage set and wastewater treatment plant for 5 people - Hellstein U2 + STMH5

Weight of own WWTP
170 kg
The outflow height of the WWTP itself
1250 mm
Inlet height to pre-treatment
1150 mm
Minimum volume of pre-treatment, min. 370l / person / day
2000 l
For reuse (watering)
water law procedure / notification method of permit
Number of increased persons
up to 8 short-term maximum EO
Show more
CZK 119,000.00
€4,861.15
1 pc.
CZK 119,000.00 +VAT
€4,861.15
1 ×
CZK 119,000.00
(1 pc. )
  • Check before buy
  • Full flexibility
  • Free assistance
  • Condition new
  • Minimum order volume 1 pc.
  • Country of dispatch Czechia
  • Destination countries Poland, Czechia, Slovakia, Estonia, Lithuania, Germany, Hungary, Romania
H
verified supplier
HELLSTEIN spol. s r.o.
Contact supplier
See all offers
see report
Parameters
Weight of own WWTP
170 kg
The outflow height of the WWTP itself
1250 mm
Inlet height to pre-treatment
1150 mm
Minimum volume of pre-treatment, min. 370l / person / day
2000 l
For reuse (watering)
water law procedure / notification method of permit
Number of increased persons
up to 8 short-term maximum EO
The material is owned by the WWTP
polyethylene
Pre-cleaning weight
90 kg
Volume of WWTP useful
1500 l
Dimensions of pre-treatment
2400x1200x1600 mm (length x width x height)
Dimensions of own WWTP (without extension)
1700x1600x2200 mm (length x width x height)
Drain height from pre-treatment
1050 mm
The height of the inlet to the WWTP itself
1350 mm
Lifespan
25-100 years
Working power
30 W (230V, 50Hz)
Organic pollution
0.3 kg / day
Number of permanent persons
2-5 EO
Necessity of concreting
No
Discharges to groundwater (however)
water management permit method
Drainage pipes
100 mm
Inlet pipe
100 mm
Pre-cleaning material
polyethylene
Warranty period
2/5/25 years (electrical / built-in / tank)
Discharge into surface waters (watercourse, sewerage)
water law procedure / notification method of permit
Daily amount of wastewater - Q
0.75 m3 / d
Manufacturer
Hellstein
Description
The STMH5 wastewater treatment plant assembly is the only one in the Czech Republic to use a modern maintenance-free three-stage treatment system.The STMH5 wastewater treatment plant set is designed for an average daily wastewater inflow of approx. 0.75 m3 / day (ie 2-5 people).The assembly of the STMH wastewater treatment plant (also a biotank with a pocket-shaped settling tank) consists of a spherical plastic (PE) tank, equipped with a technological stainless steel installation, biodisks, a membrane compressor (blower) and sludge storage (anaerobic) U2, including equipment.The blower can be placed at a distance of 10 m from the WWTP.Why choose the STMH cleaning solution: the only stable three-stage cleaning in the Czech Republic completely maintenance-free operation suitable for buildings with irregular operation (holidays, recreational facilities, etc.) use for all (spray, garden sink) or surface water (pond, sewer, river, etc. .) very long service life of the treatment plant hygienically trouble-free operation, no manipulation with the sieve basket or with excess sludge very low