Relay BIS-413 with off timer. 10A / 230V

BIS-413 230 V is available in the following versions: BIS-413 230 V - basic model with a single relay 16 ABIS-413-LED 230 V - with a contact adapted to work with receivers with high starting current, such as: LED fluorescent lamps, ESL fluorescent lamps, electronic transformers, discharge lamps, etc. BIS-413M 230 V - with contact position memory.After switching the supply on, the relay status will be restored as it was in the disconnection device BIS-413M-LED 230 V - with a contact adapted to work with receivers with high starting current and with the memory of the contact position.Operation Short pressing the button closes the contact (activates the connected receiver).The contact will be opened (switching off the controlled receiver) after the preset time t, or after pressing the button again.Long, at least 2 seconds, pressing the button causes the contact to be permanently activated.The contact opening will take place only after pressing the button again (or after a power supply failure).With timer.Power supply: 230 V Max load: 16 A Mounting: on a 35 mm rail. Electronic bistable relay enables switching on the lighting or other device from several different points by means of parallel connected control buttons.Features: Power consumption: 0.8 W Tripping delay: 0.1 ÷ 0.2 s Control pulse current: less than 5 mA Switch-off time: 1 ÷ 12 min.Tightening torque: 0.4 Nm Cooperation with illuminated buttons: YES Executive element: relay Functionality: on / off with timer Function on time: YES Number of channels: 1 Contact configuration: 1 × NO / NC Contact separation: YES Resistance to currents surge - cooperation with LED: NO Local control: YES Dedicated central control inputs: NO Radio control: NO State memory after power failure: NO Maximum load current AC-1: 16 A