Relay BIS- 404 2x 5A for the box

Operation of the bistable candlestick relay The supply of the bistable relay is signaled by the lighting of the green U diode.The candlestick relay has two separate outputs R1 and R2.The output status is forced sequentially by a momentary switch (bell) connected to the control input.After a power failure, the contacts are reset.Subsequent pressings of a button connected to the control input repeat the sequence 0-1-2-3.Warning!BIS-404 can work with illuminated buttons. Candlestick Power supply: 230 V Max load: 2 x 8 A Connection: screw terminals It works with illuminated buttons.The electronic bistable relay enables switching on the lighting or other device from several different points using the control buttons connected in parallel.Features: Power consumption: 0.7 W Relay delay: 0.1 ÷ 0.2 s Control impulse current: less than 5 mA Tightening torque: 0.4 Nm Cooperation with illuminated buttons: YES Executive element: relay Functionality: candlestick switch Function on time: NO Number of channels: 2 Contact configuration: 2 × NO Contact separation: NO Resistance to surge currents - cooperation with LED: NO Local control: YES Dedicated central control inputs: NO Radio control: NO State memory after power failure: NO Maximum load current AC-1: 2 x 8 A