merXu Protected Payments
Secure your payment until delivery.
PZ-829 liquid level monitoring relay
Manufacturer
F&F FILIPOWSKI SPÓŁKA JAWNA
Request for quotes
This offer is not active anymore. Add an inquiry and get offers from multiple sellers.
Offer from supplier:
Manufacturer
F&F FILIPOWSKI SPÓŁKA JAWNA
Operation When the liquid level drops to the MIN level (ie MIN and COM electrodes are open), the MIN contact will move to the 11-12 position; the MAX contact remains in position 8-9.After reaching the MAX state (MAX and COM electrodes shorted), the MIN relay contact is switched to the 11-10 position, and the MAX contact to the 8-7 position.Method of connecting the probes Electrode probes (3 pcs.) Connected with a cable with a wire diameter of up to 1 mm2 and a maximum length of 100 m.Warning!Terminals 4-5-6 are separated from the network.The relay complete with the PZ2 probe. Two-state (min / max).Factory-set fixed sensitivity setting.The PZ-829 relay is used to detect the presence of electrically conductive liquids at the installation levels of the flooding probes.It allows you to maintain the minimum and maximum levels of the controlled liquid within the range specified by the user.Features: Maximum load current: 2 × 16 A Power consumption: 1.1 W Tightening torque: 0.5 Nm Actuator: 2 × relay Contact configuration: 2 × NO / NC Contact separation: YES Voltage of measurement outputs: 6 V Probe type flooding: 3 x PZ2 Contact switching delay for the MIN point: 1 ÷ 2 s Contact switching delay for the MAX point: max. 5 s Probe terminals: separated from the mains by a transformer