merXu

Cancel
PREMIUMLUX Touch switch with dimmer for LED strips, mounting in ALU profile

PREMIUMLUX Touch switch with dimmer for LED strips, mounting in ALU profile

Manufacturer
PREMIUMLUX
EAN
5902596890162
Request for quotes
This offer is not active anymore. Add an inquiry and get offers from multiple sellers.
Parameters
Manufacturer
PREMIUMLUX
EAN
5902596890162
Description
PDF manualCharacteristics: The touch switch / dimmer module is primarily intended for installation in aluminum profiles together with LED strip.The switching and dimming function is activated by touching the diffuser at the point where the switch spring rests on it from below.Thus, a conductive connection with the Al profile is not used.As a result, this solution ensures significantly higher stability and switching reliability than touching the conductive profile. A short touch switches the LED device on or off.Prolonged contact in the closed state reduces or increases the luminosity. Profile cover - the diffuser must be at the point of contact of the spring made of non-conductive material (glass, plexiglass, plastic, ceramic, etc.).The maximum thickness of the material that forms the contact surface depends on its properties.A maximum of 2mm is recommended.The point of contact and the presence of the supply voltage are indicated by the blue LED.If the switch is powered on (blue LED lit), it "remembers" the brightness level setting of the connected LED device before switching off with the last touch.Switch / dimmer function: 1.When the power is connected, the switch is in the "Off" state 2.A short touch (up to 550ms) in the state \\ "Off \\" switches to the power set before the last switch-off.3.A short touch (up to 550ms) in the "On" or "Dim" state switches off the lighting.4.A longer touch at full power (above 550ms) continuously reduces the brightness of the light (up to about 1% in 3s) .5.If the light is dimmed a longer touch (above 550ms) continuously increases the brightness of the light (up to 100% from the minimum in 3s). It is designed for mounting in an aluminum profile. The fastening can be provided only by the spring pressure for ideal fastening. Double-sided adhesive tape can be used. The switch is connected by soldering. Width 10 mm.Cannot be used for LUMINES X or SLIM profiles.

New to buying at merXu?

It’s easier than you think. We provide you with a step-by-step guide.

Negotiate with the seller

You can contact the seller to adjust your order, negotiate the price, or inquire about other offers from their portfolio before making a purchase. Choose and click on the offer you are interested in. Find the button "SEND INQUIRY" on the right side of the offer and you will be moved directly to a chat with the seller.

One Request, Multiple Quotes
Request for quotes by telling supplier what you need.