merXu
Cancel

Power supply for a DIN rail 24V 3.83A 90W

Power consumption without load
0.15 W
Working temperature range
From 0 to + 40ºC
Output overcurrent protection
120-140%
The time of maintaining the output voltage in the event of an input voltage failure
Greater than 5 ms
Housing
Gray ABS plastic
Automatic return to work after the cause of the error has ceased
YES
Show more
PLN 124.10
€27.19
1 pc.
PLN 124.10 +VAT
€27.19
1 ×
PLN 124.10
(1 pc. )
  • Check before buy
  • Full flexibility
  • Free assistance
  • Condition new
  • Minimum order volume 1 pc.
  • Country of dispatch Poland
  • Destination countries Poland, Czechia, Slovakia
  • Dispatch time 3 days
L
verified supplier
LEDIN Sp. z o.o. Sp. K.
Contact supplier
See all offers
see report
Parameters
Power consumption without load
0.15 W
Working temperature range
From 0 to + 40ºC
Output overcurrent protection
120-140%
The time of maintaining the output voltage in the event of an input voltage failure
Greater than 5 ms
Housing
Gray ABS plastic
Automatic return to work after the cause of the error has ceased
YES
Power factor
0.6
Cooling method
Free air circulation
Built-in active power factor corrector (PFC)
NO
Stabilization of the output voltage as a function of load changes
±3%
Rated input voltage range
100-240 VAC
Compliance with standards in the field of EMC
EN55032 Class B
Output overvoltage protection
YES
Maximum value of the insulation leakage current
0.25 mA max
Compliance with safety standards
EN62368
Maximum allowable current consumption
2.2 A
Output short-circuit protection
YES
Allowable range of input voltages
90-264 VAC
Stabilization of the output voltage as a function of changes in the input voltage
±2%
Required minimum load
NO
Output voltage trimmer adjustment
23-25 V
Connections
Screw clamps
The frequency range of the mains voltage
47-53 Hz
Working environment humidity range
25% to 75% RH
Rated output power
90 W
Efficiency at 10% load
88%
Average energy conversion efficiency
Above 89%
The maximum value of ripple and noise voltage in the output voltage
150 mVp-p
Maximum value of the inrush current
50 A
Dimensions
90 × 58 × 70 mm
Acceptance marks
RoHS, CE
IP grade
20
Output voltage rise time
Less than 40 ms
Rated load current
3.83 A
Rated output voltage
24 V
Maximum delay start time
0.5s
EAN
5904139604724
Manufacturer
ESPE
Description
DIN rail power supply 24V 3.83A 90W HDN9024 is a high-quality, efficient switching power supply in a plastic housing for mounting on a DIN TS35 mm rail with a width of 4U.Its design is based on high-quality electronic components that allow for continuous, long-term operation.It is reliable, fully secured and stable.It provides high efficiency and excellent technical parameters.The perforated housing provides good ventilation, and the trimmer allows you to fine-tune the voltage to compensate for the voltage drop across the wires.Double output terminals make it easy to connect receivers.