merXu
Cancel
Power supply for a DIN rail 12V 1.25A 15W ESPE
Power supply for a DIN rail 12V 1.25A 15W ESPE
Power supply for a DIN rail 12V 1.25A 15W ESPE
Power supply for a DIN rail 12V 1.25A 15W ESPE
Power supply for a DIN rail 12V 1.25A 15W ESPE

Power supply for a DIN rail 12V 1.25A 15W ESPE

Power consumption without load
0.15 W
Working temperature range
From 0 to + 40ºC
Maximum value of the inrush current
35 A
Output overcurrent protection
120-140%
The time of maintaining the output voltage in the event of an input voltage failure
Greater than 5 ms
Housing
Gray ABS plastic
Show more
€11.31 +VAT
PLN 53.19
1 pc.
€11.31 +VAT
PLN 53.19
1 ×
PLN 53.19 +VAT
(1 pc. )
or
  • Full flexibility
  • Need help?
Parameters
Power consumption without load
0.15 W
Working temperature range
From 0 to + 40ºC
Maximum value of the inrush current
35 A
Output overcurrent protection
120-140%
The time of maintaining the output voltage in the event of an input voltage failure
Greater than 5 ms
Housing
Gray ABS plastic
Automatic return to work after the cause of the error has ceased
YES
Cooling method
Free air circulation
Output voltage trimmer adjustment
11-13 V
Built-in active power factor corrector (PFC)
NO
Maximum allowable current consumption
0.4 A
Stabilization of the output voltage as a function of load changes
±3%
Rated input voltage range
100-240 VAC
Compliance with standards in the field of EMC
EN55032 Class B
Power factor
0.5
Output overvoltage protection
YES
Maximum value of the insulation leakage current
0.25 mA max
Compliance with safety standards
EN62368
Output short-circuit protection
YES
Allowable range of input voltages
90-264 VAC
Stabilization of the output voltage as a function of changes in the input voltage
±2%
Required minimum load
NO
Connections
Screw clamps
The frequency range of the mains voltage
47-53 Hz
Working environment humidity range
25% to 75% RH
Rated output power
15 W
Rated load current
1.25 A
Average energy conversion efficiency
Positive 83%
The maximum value of ripple and noise voltage in the output voltage
150 mVp-p
Acceptance marks
RoHS, CE
Dimensions
90 × 58 × 18 mm
Efficiency at 10% load
76%
Rated output voltage
12V
IP grade
20
Output voltage rise time
Less than 40 ms
Maximum delay start time
0.5s
EAN
5904139604694
Manufacturer
ESPE
Description
DIN rail power supply 12V 1.25A 15W ESPE ESPE-HDN1512 is a high-quality, efficient switching power supply in a plastic housing for mounting on a DIN TS35 mm rail with a width of 1U.Its design is based on high-quality electronic components that allow for continuous, long-term operation.It is reliable, fully secured and stable.It provides high efficiency and excellent technical parameters.The perforated housing provides good ventilation, and the trimmer allows you to fine-tune the voltage to compensate for the voltage drop across the wires.Double output terminals make it easy to connect receivers.