merXu
Cancel
Off-load switch Spamel SK40-2.8210\S10 Reverser IP65 Plastic Turn button Screw connection
Off-load switch Spamel SK40-2.8210\S10 Reverser IP65 Plastic Turn button Screw connection
Off-load switch Spamel SK40-2.8210\S10 Reverser IP65 Plastic Turn button Screw connection

Off-load switch Spamel SK40-2.8210\S10 Reverser IP65 Plastic Turn button Screw connection

Manufacturer
Spamel
Manufacturer Code
SK40-2.8210\S10
EAN
5907723115231
Model
Reverser
Degree of protection (IP), front side
IP65
Material housing
Plastic
Show more
€13.88 +VAT
PLN 65.08
1 pc.
€13.88 +VAT
PLN 65.08
1 ×
PLN 65.08 +VAT
(1 pc. )
or
  • Need help?
Parameters
Manufacturer
Spamel
Manufacturer Code
SK40-2.8210\S10
EAN
5907723115231
Model
Reverser
Degree of protection (IP), front side
IP65
Material housing
Plastic
Type of control element
Turn button
Type of electrical connection of main circuit
Screw connection
Number of poles
4
Rated permanent current Iu [A]
40
Rated operation power at AC-3, 400 V [kW]
12
Number of auxiliary contacts as normally closed contact
0
Number of auxiliary contacts as normally open contact
0
Number of auxiliary contacts as change-over contact
0
With zero (off) position
Yes
With retraction in 0-position
No
Suitable for floor mounting
Yes
Suitable for front mounting
No
Suitable for distribution board installation
No
Suitable for intermediate mounting
Yes
Complete device in housing
No
Description
Application Cam switches are electric multi-line rotary switches suitable for switching currents on and off.Cam switches are used in the circuits of low voltage electrical installations, especially as switches, disconnectors, switches and control switches.Cam switches can be installed in closed rooms (pollution degree 3 - industrial use) in the temperature of -40 ... + 70 ° C.The cam switches meet the requirements of PN-EN 60947-3, IEC 60947-3.Moreover, they can operate under environmental conditions specified in the standards: IEC 60068-2-6 (vibration), IEC 60068-2-27 (shock), IEC 60068-2-2 (dry heat), IEC 60068-2-1 (cold) , IEC 60068-2-30 (wet heat), IEC 60068-2-52 (salt spray).Construction The segment construction of switches with double cams enables the creation of any switching programs as a function of the position of the drive knob.By using the selected number of rack teeth in the drive mechanism, it is possible to obtain knob pitch angles every 30 °, 45 ° or 90 °, e.g. at 30 ° it gives us a maximum of 12 positions of the knob.In addition, SK switch disconnectors are characterized by small dimensions, protection degree IP20, which increases the safety of the installer.Due to the fixing method, the following connectors are offered: • To the desk - P • To the base-rail (TS35) - BS • In the housing - OB11, OB12, OB13, OB14 • In the housing with the lamp OB11 L, OB12 L, OB13 L, OB14 L • For the rail (TS35) with a module cover - S10, Lines »Cam switches SK 10/16/20» Cam switches SK 25/32/40 »Fronts for SK switches» Switch finder (diagrams, diagrams)