merXu
Cancel

Off-load switch Spamel ŁK63-3.8368\P07 Reverser IP65 Plastic Turn button Screw connection

Manufacturer
Spamel
Manufacturer Code
ŁK63-3.8368\P07
EAN
5907723008489
Model
Reverser
Degree of protection (IP), front side
IP65
Material housing
Plastic
Show more
PLN 129.29
€28.22
1 pc.
PLN 129.29 +VAT
€28.22
1 ×
PLN 129.29
(1 pc. )
  • Check before buy
  • Full flexibility
  • Free assistance
  • Minimum order volume 1 pc.
  • Country of dispatch Poland
  • Destination countries Poland, Czechia, Slovakia, Estonia, Lithuania, Germany, Hungary, Romania
M
verified supplier
METPOL ELECTROTECHNOLOGY URSZULA KARPIŃS
Contact supplier
See all offers
see report
Parameters
Manufacturer
Spamel
Manufacturer Code
ŁK63-3.8368\P07
EAN
5907723008489
Model
Reverser
Degree of protection (IP), front side
IP65
Material housing
Plastic
Type of control element
Turn button
Type of electrical connection of main circuit
Screw connection
Rated permanent current Iu [A]
63
Rated operation power at AC-3, 400 V [kW]
20
Number of auxiliary contacts as normally closed contact
0
Number of auxiliary contacts as normally open contact
0
Number of auxiliary contacts as change-over contact
0
With zero (off) position
Yes
With retraction in 0-position
No
Suitable for floor mounting
Yes
Suitable for front mounting
No
Suitable for distribution board installation
No
Suitable for intermediate mounting
Yes
Complete device in housing
No
Description
Application Cam switches are electric multi-line rotary switches suitable for switching currents on and off.Cam switches are used in casings of low voltage electrical installations, especially as switches, disconnectors, switches and control switches.Cam switches can be installed in closed rooms (pollution degree 3 - industrial use) at -40 ... + 70 ° C (ŁK40, 63) and -25 ... + 70 ° C (ŁK15).The cam switches meet the requirements of PN-EN60947-3, IEC 60947-3.Moreover, they can operate under environmental conditions specified in the standards: IEC 60068-2-6 (vibration), IEC 60068-2-27 (shock), IEC 60068-2-2 (dry heat), IEC 60068-2-1 (cold) , IEC 60068-2-30 (wet heat), IEC 60068-2-52 (salt spray).Construction The segment construction of switches with double cams enables the creation of any switching programs as a function of the position of the drive knob.By using the selected number of rack teeth in the drive mechanism, it is possible to obtain knob pitch angles every 30 °, 45 ° or 90 °, e.g. at 30 ° it gives us a maximum of 12 positions of the knob.Due to the method of fixing, the following connectors are offered: • To the desktop - P • To the base - B • To the rail - S • In the housing - OB1, OB2, OB3, OB4 • In the flush-mounted housing - OBP1 Links »ŁK15 cam switches» ŁK40 cam switches / 63 »Fronts for ŁK switches» Switch search engine (diagrams, diagrams)