merXu
Cancel

Off-load switch Spamel ŁK25R-3.8380\B03 Reverser IP65 Plastic Turn button Screw connection

Manufacturer
Spamel
Manufacturer Code
ŁK25R-3.8380\B03
EAN
5907723058033
Model
Reverser
Degree of protection (IP), front side
IP65
Material housing
Plastic
Show more
PLN 52.86
€11.52
1 pc.
PLN 52.86 +VAT
€11.52
1 ×
PLN 52.86
(1 pc. )
  • Check before buy
  • Full flexibility
  • Free assistance
  • Minimum order volume 1 pc.
  • Country of dispatch Poland
  • Destination countries Poland, Czechia, Slovakia, Estonia, Lithuania, Germany, Hungary, Romania
H
verified supplier
Hurtownia Elektryczna ELEKTROMEGA s.c. B
Contact supplier
See all offers
see report
Parameters
Manufacturer
Spamel
Manufacturer Code
ŁK25R-3.8380\B03
EAN
5907723058033
Model
Reverser
Degree of protection (IP), front side
IP65
Material housing
Plastic
Type of control element
Turn button
Type of electrical connection of main circuit
Screw connection
Number of poles
3
Rated permanent current Iu [A]
25
Rated operation power at AC-3, 400 V [kW]
13
Number of auxiliary contacts as normally closed contact
0
Number of auxiliary contacts as normally open contact
0
Number of auxiliary contacts as change-over contact
0
With zero (off) position
Yes
With retraction in 0-position
No
Suitable for floor mounting
Yes
Suitable for front mounting
No
Suitable for distribution board installation
No
Suitable for intermediate mounting
Yes
Complete device in housing
No
Description
Application Cam switches are devices for mechanical switching on and off of currents with the possibility of realizing a specific switching program as a function of turning the knob.Cam switches are used in casings of low voltage electrical installations, especially as switches, disconnectors, switches and control switches.Cam switches can be installed in closed rooms (pollution degree 3 - industrial use) in the temperature of -40 ... + 70 ° C.The cam switches meet the requirements of PN-EN60947-3, IEC 60947-3.Moreover, they can operate under environmental conditions specified in the standards: IEC 60068-2-6 (vibration), IEC 60068-2-27 (shock), IEC 60068-2-2 (dry heat), IEC 60068-2-1 (cold) , IEC 60068-2-30 (wet heat), IEC 60068-2-52 (salt spray).Construction The segment construction of switches with double cams enables the creation of any switching programs as a function of the position of the drive knob.The connector can be equipped with a mechanism with the angle of rotation of the knob every 30 °, 45 ° or 90 °, e.g. at 30 ° it gives us a maximum of 12 positions of the knob.Due to the way of fixing, the following connectors are offered: • To the desktop - P • To the base - B • To the rail - S • In the housing - OB1, OB2, OB3, OB4 • In the flush-mounted housing - OBP1 Links »ŁKR cam switches» End faces for connectors cam switches ŁKR »Switch search engine (diagrams, diagrams)