merXu
Cancel

Non-automatic detector for danger detection system Spamel OP1-W01-A\20-M Fire brigade alarm (red) Red Plastic IP65

Manufacturer
Spamel
Manufacturer Code
OP1-W01-A\20-M
EAN
5907723097377
Type of messaging
Fire brigade alarm (red)
Colour
Red
Material
Plastic
Show more
Material
Degree of protection (IP)
PLN 73.36
€16.07
1 pc.
PLN 73.36 +VAT
€16.07
1 ×
PLN 73.36
(1 pc. )
  • Check before buy
  • Full flexibility
  • Free assistance
  • Minimum order volume 1 pc.
  • Country of dispatch Poland
  • Destination countries Poland, Czechia, Slovakia, Estonia, Lithuania, Germany, Hungary, Romania
M
verified supplier
METPOL ELECTROTECHNOLOGY URSZULA KARPIŃS
Contact supplier
See all offers
see report
Parameters
Manufacturer
Spamel
Manufacturer Code
OP1-W01-A\20-M
EAN
5907723097377
Type of messaging
Fire brigade alarm (red)
Colour
Red
Material
Plastic
Degree of protection (IP)
IP65
Height [mm]
113
Width [mm]
113
Depth [mm]
52
Radio system
No
With glass disc
Yes
With paper cover
No
VdS accepted
No
Description
OP1 manual call point. PRODUCT DESCRIPTION The OP1 manual call point is intended for use in public industrial premises.It is made in two versions: under plaster and over plaster.Each version is offered in two types: A and B.OP1 type A in an emergency situation requires only breaking the glass, which causes the button to be released.In OP1 type B, after breaking the glass, press the button with automatic return.Each enclosure can be fitted with three switches SP22-10 (NO) or SP22-01 (NC).Additionally, in each version there can be mounted a diode, which can be connected to a switch or directly to the alarm system of a given facility.The signal is activated and sent by breaking the glass (type A) or after breaking the glass and pressing the button with automatic return (type B).The alarm is reset by replacing the fragile element (glass - order symbol PPOŻ-5701).The product complies with the PN-EN 54-11 standard.Certificate of admittance No. 0654/2009.EC Certificate of Conformity No. 1438 / CPD / 0130.ATTENTION When selecting current paths, the selected type (A or B) TYPE A must be taken into account: normally open circuit: short-circuit condition (closed circuit) occurs after mounting the cover with a glass - the button is pressed open circuit condition (open circuit) occurs after removing the cover with a glass or breaking it fast - the button is not pressed Normally open track: short circuit and open circuit opposite to the normally open circuit TYPE B Normally open circuit: short circuit condition (closed circuit) occurs when the button is pressed before that, remove the cover with the glass or break the glass and press the button manually open state (circuit open) occurs after mounting the cover with the glass as well as after its dismantling or breaking the glass but without pressing the button - button not pressed Normally open track: short circuit and open circuit opposite to the normally open circuit