NaOH 50% - 5L - Alkaline detergent for pipe clogging and tanks
FREE SHIPPING FROM € 200 ON ORDER
Alkaline cleaner for pipes and tanks.
FIELD OF APPLICATION
Special tool for removing blockages and removing grease, dirt and oil from surfaces.
Very corrosive.Soluble in water, releasing a lot of heat.Effectively removes proteins and fats.Due to its low foaming, it is especially suitable for washing in a circular washing system.Not suitable for aluminum and galvanized washing surfaces. 50% sodium hydroxide solution freezes at 12 ° C.
USE
To clear the blockage
Pour the product into the drain line and leave for 1-2 hours.In case of more severe blockages, let the product work overnight, in which case it is guaranteed to remove the most difficult to dissolve blockages (including hair).Repeat the procedure if necessary.For best results, it is advisable to wash the drain regularly.
Surface cleaning
1-2% washing solution (100-200 ml sodium hydroxide solution / 10 liters water) depending on the strength of the dirt Use: Handle in a ventilated place.Use protective equipment.Avoid contact with the substance and inhalation of vapors.When diluting, pour the substance into water, not the other way around.Sodium hydroxide releases strong heat when first washing the system / article with lukewarm water, then washing with an appropriate concentration of sodium hydroxide solution.Washing temperature at least 60 ° C.Washing time 20-30 min.Finally, rinse the system / object with clean water. Wash thoroughly after handling.Wash contaminated clothing before reuse.
COMPOSITION
Sodium hydroxide, water.
WARNING
Corrosive.Causes severe skin burns and eye damage and irritates the respiratory tract.Avoid contact with skin and eyes.Wear protective gloves and eye / face protection.In case of contact, rinse cautiously with water for several minutes.Remove contact lenses, if present and easy to do.Rinse again.Keep out of the reach of children.Read the instruction manual before use.
pH = 14