LRM001 / 11-12 RS - Reactive Power Regulator - Current measurement 1 phase, 12 steps RS
power consumption
up to a maximum of 10 VA
level of security
IP20
assembly
array
weight
0.3 kg
supply voltage
230 VAC ± 10%, 50 Hz
dimensions
144x144x58 mm
Show more
Request for quotes
This offer is not active anymore. Add an inquiry and get offers from multiple sellers.
power consumption
up to a maximum of 10 VA
level of security
IP20
assembly
array
weight
0.3 kg
supply voltage
230 VAC ± 10%, 50 Hz
dimensions
144x144x58 mm
working temperature
-25°C 60°C
relative humidity
50% for + 40 ° C, 90% for 60 ° C
communication
RS485 Modbus / RTU
Friendly and functional software even for the most demanding users.
The Lopi microprocessor reactive power factor regulators are the result of the work and experience of Lopi engineers and a response to the current market needs.The controller with effective algorithms ensures optimal operation of the reactive power compensation system, and thus effective minimization of costs incurred for reactive energy .Reactive power regulators are used to control capacitor banks and shunt reactor batteries as part of reactive power compensation processes.This process consists in measuring the network parameters and then, by using thyristor switches or contactors, switching on the appropriate component of the compensation system in order to ensure the desired cosφ. Lopi reactive power regulators have a wide range of applications, as they are designed to work in automatic reactive power compensation systems, both inductive and capacitive .The device is available in 6- and 12-step versions with network parameter measurement in one or three phases.This enables optimal adjustment - depending on the number of stages, the design power of the battery and the symmetry of the load.Application
- inductive reactive power compensation: works with capacitive stages
- capacitive reactive power compensation - works with inductive stages
- reactive power compensation in case of its variable capacitive-inductive character
- compensation in networks with symmetrical and asymmetrical load - single or three-phase measurement and control of single and / or three-phase elements
Functions
- display of cosφ and Power Factor
- idle compensation function
- reactive power offset function
- uniform algorithm stage consumption
- the possibility of any programming of the type and power of individual outputs (no series imposed)
- quick algorithms for reaching the set cosφ factor
- individually set discharge times (locks) degrees
- the ability to control the ventilation of the housing based on op temperature measurement and set hysteresis
- steps disconnection in case of exceeding the set threshold temperature
- remote reading option