merXu Protected Payments
Secure your payment until delivery.
Liquid level control relay PZ-829RC with probes
Manufacturer
F&F FILIPOWSKI SPÓŁKA JAWNA
Request for quotes
This offer is not active anymore. Add an inquiry and get offers from multiple sellers.
Offer from supplier:
Manufacturer
F&F FILIPOWSKI SPÓŁKA JAWNA
Operation When the liquid level drops to the MIN level (ie MIN and COM electrodes are open), the MIN contact will move to the 11-12 position; the MAX contact remains in position 8-9.After reaching the MAX state (MAX and COM electrodes shorted), the MIN relay contact is switched to the 11-10 position, and the MAX contact to the 8-7 position.Method of connecting the probes Electrode probes (3 pcs.) Connected with a cable with a wire diameter of up to 1 mm2 and a maximum length of 100 m.Warning!Terminals 4-5-6 are separated from the network.The relay complete with the PZ2 probe. Two-state (min / max).With adjustable sensitivity.The PZ-829 relays are used to detect the presence of electrically conductive liquids on the installation levels of the flooding probes.They allow you to maintain the minimum and maximum levels of the controlled liquid within the range specified by the user.Features: Maximum load current: 2 × 16 A Power consumption: 1.1 W Tightening torque: 0.5 Nm Actuator: 2 × relay Contact configuration: 2 × NO / NC Contact separation: YES Sensitivity - adjustable: 1 ÷ 100 k ?Voltage of measuring outputs: 6 V Type of flood probe: 3 x PZ2 Delay of contact switching for the MIN point: 1 ÷ 2 s Delay of contact switching for the MAX point: max. 5 s Terminals of the probes: separated from the mains by a transformer