+2
Hydraulic chuck DIN69871ADB SK40 18x80.5mm WTE
Manufacturer
WTE
EAN
4332163364658
Key Size
5 mm
L1
80 mm
L2
49 mm
D1
18 mm
Show more
Request for quotes
This offer is not active anymore. Add an inquiry and get offers from multiple sellers.
Manufacturer
WTE
EAN
4332163364658
Key Size
5 mm
L1
80 mm
L2
49 mm
D1
18 mm
D2
40 mm
l3
10 mm
d3
49,5 mm
G.
M10
Size
universal
Hydraulic chuck, DIN 69871, shape AD / B, with internal cooling, SK 40
Type: plastic with tensile strength 1600–1800 N / mm2 and hardness 52 ± 2 HRC.The hydraulic oil is pressurized by the hydraulic clamping set (set screw, pressure pin and seal) using a hexagonal wrench with a cross handle.The resulting pressure causes the expansion sleeve to deform evenly, so that the tool shank is clamped with a slight radial runout (max. 3 μm).Cone according to DIN 254.Slot for data carrier / chip (Ballauf).
Taper angle tolerance: AT3
Maximum speed: 40,000 min-1
Optimum operating temperature: 20–50 ° C
Maximum coolant pressure: 80 bar
Adjustment range: 10 mm
Scope of delivery: hydraulic clamping chuck with hex key and transverse handle.