merXu
Cancel
DIN343 HSS reamer, Morse shank - 16 mm
DIN343 HSS reamer, Morse shank - 16 mm
DIN343 HSS reamer, Morse shank - 16 mm
DIN343 HSS reamer, Morse shank - 16 mm
DIN343 HSS reamer, Morse shank - 16 mm
DIN343 HSS reamer, Morse shank - 16 mm
+4

DIN343 HSS reamer, Morse shank - 16 mm

EAN
4031093158572
Manufacturer
Gühring
Manufacturer Code
1085 1600
€59.60 +VAT
1 pc.
or
You cannot place an order because this offer is not available at the moment.
  • Need help?
Parameters
EAN
4031093158572
Manufacturer
Gühring
Manufacturer Code
1085 1600
Description
Reamer, with Morse taper Shank Design: HSS, DIN 343, type N.Ground profile, vapor-tempered surface, right-cutting.Normal side rake angle, normal thickness of the core, no taper.Application: for reaming pre-drilled, cast or punched holes.The stable structure and 3 cutting edges allow to reduce the circularity error and misalignment of the drilled holes.In addition, the surface of the wall after drilling is improved so that the hole can be finished with a reamer.Follow the recommendations in the column "Minimum diameter of the drilled hole".Note: The chamfer diameter must be smaller than the drilled hole.Other dimensions, type HSS-E, solid carbide version, with carbide tips or long reamers according to DIN 1864 available on request.