The mechanism of the electronic regulator of push-turn lighting, gold metallic KARLIK DECO 8DRO-1
Manufacturer
KARLIK ELEKTROTECHNIK SP. Z O.O.
Manufacturer Code
8DRO-1
EAN
5901832001638
Technical data
IP 20, 230V ~ 50Hz; 40 - 400W
Gross weight [kg]
0.139
Request for quotes
This offer is not active anymore. Add an inquiry and get offers from multiple sellers.
Manufacturer
KARLIK ELEKTROTECHNIK SP. Z O.O.
Manufacturer Code
8DRO-1
EAN
5901832001638
Technical data
IP 20, 230V ~ 50Hz; 40 - 400W
Gross weight [kg]
0.139
Mechanism of electronic push-turn lighting regulator gold metallic KARLIK DECO 8DRO-1
Technical data
- IP 20 protection degree
- 230 V power supply ~ 50 Hz
- Tolerance of the supply voltage -15 ÷ + 10%
- Lighting control, switch and regulation on the potentiometer 10 ÷ 100%
- Co-operation with conventional incandescent load , halogen 230 V ~, low voltage halogen 12 V (with toroidal and conventional transformers)
- Load power 40 ÷ 400 W
- Regulation range 5 ÷ 40 ° C
- Triac control element
- Number of connection terminals 3
- Cross-section of connection cables max 1.5 mm2
- Housing mounting standard ø 60 mm flush-mounted box
- < li> Operating temperature range from -20 ° C to + 45 ° C
- 2KV surge voltage
- Protection class II
- Overvoltage category II
- Pollution degree 2
DECO mechanisms and frames are sold separate.
- The electronic push-turn light control (= dimmer) allows you to continuously adjust the light intensity from 0 to 100% of the full lighting power, using almost any luminaire.In this way, it increases comfort and everyday savings of electricity, the consumption of which is proportional to the level of lighting.
- The lighting regulator is used to control the lighting level of typical incandescent lighting.The control is done using a potentiometer with a switch.The system enables intelligent control of lighting systems, providing comfort, convenience and economy in use.The regulator is equipped with overload and short-circuit protection.
- Attention!Connecting two lighting regulators in a stair system may damage the regulators.
Technical advantages of the DECO series fastener mechanisms
- solid construction (metal mounting frame) ensures proper assembly;
- screw terminals guarantee a secure connection ;
- captive screws for screw clamps;
- "" "" dovetails "" "" in the connector cube are used to position the mechanisms horizontally in multi-frame systems;
- solid claws for secure fixing of the equipment in the installation box;
- claws in the neutral position make it easier to insert the mechanism into the box.The hidden claws are protected to avoid damaging the cable insulation and cutting injuries during installation;
- the connector connection diagram shown on the ankle allows for proper connection.