Electronic lighting controller by push-turn silver metallic KARLIK FLEXI 7FRO-1
Technical data
- IP 20 protection degree
- Power supply 230 V ~ 50 Hz
- Supply voltage tolerance -15 ÷ + 10%
- Lighting control, switch and potentiometer adjustment 10 ÷ 100%
- Co-operation with conventional incandescent load, halogen 230 V ~, low voltage halogen 12 V (with toroidal and conventional transformers)
- Load power 40 ÷ 400 W
- Regulation range 5 ÷ 40 ° C
- Triac control element
- Number of connection terminals 3
- Cross-section of connection cables max 1.5 mm2
- Housing fixing standard ø 60 mm flush-mounted box
- Temperature operating range from -20 ° C to + 45 ° C
- 2KV surge voltage
- Protection class II
- Overvoltage category II
- < li> Pollution degree 2
- UV resistant
F series products LEXI are sold with an external frame, as a "monoblock" system with the possibility of creating any multiple systems vertically or horizontally.For this purpose, there is no need to purchase additional multiple outer frames.Thanks to the innovatively designed outer frame, it is enough to remove its side and use a "tongue" and "groove" to connect any number of frames with each other.
Frames should be assembled without mechanisms.
The electronic push-turn light control (= dimmer) enables the continuous adjustment of the light intensity from 0 to 100% of the full lighting power, using almost any luminaire.In this way, it increases comfort and everyday savings of electricity, the consumption of which is proportional to the level of lighting.
The lighting regulator is used to control the lighting level of typical incandescent lighting.The control is done using a potentiometer with a switch.The system enables intelligent control of lighting systems, providing comfort, convenience and economy in use.The regulator is equipped with overload and short-circuit protection.
Note!
Connecting two lighting controllers in a stair system may damage the controllers.