+4
Dial gauge, electric, 1086 R-HR 12.5 mm (0.5 ") 0.001 mm MAHR
Manufacturer
Mahr
EAN
4059192061678
Request for quotes
This offer is not active anymore. Add an inquiry and get offers from multiple sellers.
Manufacturer
Mahr
EAN
4059192061678
Dial gauge, digital, for static measurements
Version: Clamping pin and measuring pin made of hardened stainless steel.Working element and display rotatable by 280 °.The height of the digits on the LCD display 11 mm.8 mm diameter mandrel, protective cap on the measuring tip.With RS232, USB and Digimatic data output.Supplied with CR2450, 3V battery.
Functions: on and off, mm / inch switching, key lock for set zero position, no need to reset after switching on (Absolut system), MAX / MIN memory for searching for a turning point, entering tolerances, ABS (switch from relative to absolute measurement), reverse counting, preset function (preset measurement value).
Version: Clamping pin and measuring pin made of hardened stainless steel.Working element and display rotatable by 280 °.The height of the digits on the LCD display 11 mm.8 mm diameter mandrel, protective cap on the measuring tip.With RS232, USB and Digimatic data output.Supplied with CR2450, 3V battery.
Functions: on and off, mm / inch switching, key lock for set zero position, no need to reset after switching on (Absolut system), MAX / MIN memory for searching for a turning point, entering tolerances, ABS (switch from relative to absolute measurement), reverse counting, preset function (preset measurement value).
Technical parameters:
- Measuring range: 12.5 mm
- Reading: 0.0001 mm
- Case Ø: 60.5 mm
- Accuracy: 0.0005 mm
- Type: MarCator 1086 R-HR
- WGNr .: W488